LAYOUT‐DESIGNS (TOPOGRAPHIES) OF INTEGRATED CIRCUITS ACT, 2004 (ACT 667)
ARRANGEMENT OF SECTIONS
Section
1. Protection
2. Originality
3. Right to protection
4. Effect of protection
5. Commencement
6. Duration of protection
7. Filing requirements
8. Registration and publication
9. Right to transfer
10. Changes in ownership
11. Contractual licences
12. Cancellation
13. Representation
14. Infringement; enforcement of exclusive right
15. Offence
16. Exploitation by a government agency or third person
17. Exercise of discretionary powers
18. Extension of time
19. Appeals
20. Application of international treaties
21. Regulations
22. Interpretation
THE SIX HUNDRED AND SIXTY‐SEVENTH
ACT OF THE PARLIAMENT OF THE REPUBLIC OF GHANA
ENTITLED
LAYOUT‐DESIGNS (TOPOGRAPHIES) OF INTEGRATE CIRCUITS ACT, 2004
AN ACT to provide for the protection of layout‐designs (topographies) of integrated circuits and for related matters.
DATE OF ASSENT: 25th March, 2004.
BE IT ENACTED by Parliament as follows:
Section 1—Protection
(1) Protection under this Act may be obtained for layout‐designs of integrated circuits if and to the extent that they are original within the meaning of section 2.
(2) Registration may only be applied for if the layout‐design has not been commercially exploited or has been commercially exploited for not more than two years, anywhere in the world.
Section 2—Originality
(1) A layout‐design shall be considered to be original if it is the result of its creator’s own intellectual effort and is not commonplace among creators of layout‐designs and manufacturers of integrated circuits at the time of its creation.
(2) A layout‐design consisting of a combination of elements and interconnections that are commonplace is protected only if the combination taken as a whole is original within the meaning of subsection (1).
Section 3—Right to Protection
(1) The right to a layout‐design protection belongs to the creator of the layout‐design and may be assigned, transferred or devolve by succession.
(2) Where several persons have jointly created a layout‐design, the right to the layout‐design protection belongs to them jointly.
(3) Where the layout‐designs created in execution of a commission or an employment contract, the right to the layout‐design protection belongs, in the absence of any contractual provisions to the contrary, to the person who commissioned the work or to the employer.
Section 4—Effect of Protection
(1) Protection under this Act does not depend upon whether or not the integrated circuit which incorporates the protected layout‐design is itself incorporated in an article.
(2) Subject to subsection (3) and section 16, the following acts if performed without the authorization of the right holder is unlawful
(a) an act which reproduces, whether by incorporation in an integrated circuit or otherwise, the protected layout‐design in its entirety or any part of it, except the act of reproducing any part that does not comply with the requirement of originality referred to in section 2;
(b) the act of importing, selling or otherwise distributing for commercial purposes;
(i) the protected layout‐design;
(ii) an integrated circuit in which the protected layout‐design is incorporated; or
(iii) an article incorporating the integrated circuit in so far as the integrated circuit or article continues to contain an unlawfully reproduced layout‐design.
(3) The effect of protection of a layout‐design under this Act does not extend to
(a) the reproduction of the protected layout‐design for private purposes or for the sole purpose of evaluation, analysis, research or teaching;
(b) the incorporation in an integrated circuit of a layout‐design created on the basis of the analysis or evaluation and which is itself original within the meaning of section 2 or the performance of any of the acts referred to in subsection (2) in respect of that layout‐design;
(c) the performance of any of the acts referred to in subsection (2)(b), where the act is performed in respect of
(i) a protected layout‐design that has been put on the market by or with the consent of the right holder; or
(ii) an integrated circuit in which the layout‐design is incorporated has been put on the market by or with the consent of the right holder;
(d) the performance of any of the acts referred to in subsection (2)(b) in respect of
(i) an integrated circuit which incorporates an unlawfully reproduced layout‐design; or
(ii) an article incorporating such an integrated circuit
where the person performing or ordering the act did not know or had no reasonable grounds to know at the time when acquiring the integrated circuit, that it incorporated an unlawfully reproduced layout‐design;
(e) the performance of any of the acts referred to in subsection (2)(b) where the act is performed in respect of an identical layout‐design which is original and has been created independently by a third party.
(4) Where the person who performs or orders the acts under paragraph (d) of subsection (3) receives sufficient notice that the layout‐design was unlawfully reproduced
(a) that person may perform any of the acts only with respect to the stock on hand or ordered before notice was given; and
(b) that person is liable to pay to the right holder a sum equivalent to a reasonable royalty such as would be payable under a freely negotiated licence in respect of the layout‐design.
Section 5—Commencement
Protection of a layout‐design under this Act shall commence
(a) on the date of the first commercial exploitation, anywhere in the world, of the layout‐design by or with the consent of the right holder on the condition, that an application for protection is filed by the right holder with the Registrar within the time limit referred to in section 1(2); or
(b) on the filing date accorded to the application for the registration of the layout‐design filed by the right holder, if the layout‐design has not been previously exploited commercially anywhere in the world.
Section 6—Duration of Protection
Protection of a layout‐design under this Act shall terminate at the end of ten years after the date of commencement of protection.
Section 7—Filing Requirements
(1) An application for the registration of a layout‐design shall be in writing and shall be filed with the Registrar.
(2) A separate application shall be filed for each layout‐design.
(3) The application shall
(a) contain a request for registration of the layout‐design in the register and a brief and precise designation of the layout‐design;
(b) indicate the name, address, nationality and residence of the applicant;
(c) be accompanied with a power of attorney appointing the representative of the applicant, if any;
(d) be accompanied with a copy or drawing of the layout‐design together with information defining the electronic function which the integrated circuit is intended to perform but the application may omit parts of the copy or drawing that relate to the manner of manufacture of the integrated circuit, in so far as the parts submitted are sufficient to allow the identification of the layout‐design;
(e) specify the date of first commercial exploitation of the layout‐design anywhere in the world or indicate that the exploitation has not commenced; and
(f) provide particulars establishing the right to protection under section 3.
(4) Where an application does not comply with the requirements of subsection (3), the Registrar shall notify the applicant of the defects and invite the applicant to correct the defects within the prescribed period.
(5) Where the defects are corrected within the prescribed period, the Registrar shall accord as the filing date, the date of receipt of the application, on condition that, at the time of receipt, the application
(a) contained an express or implicit indication that the registration of a layout‐design is requested;
(b) contained indications allowing the identity of the applicant to be established; and
(c) was accompanied with a copy or drawing of the layout‐design.
(6) Where the requirements of subsection (5) are not compiled with at the date of receipt of the application but are complied with within the prescribed period, the date of receipt of the required correction shall be the filing date of the application.
(7) The Registrar shall confirm the filing date and communicate it to the applicant.
(8) Where the defects are not corrected within the time limit the application shall be treated as if it had not been filed.
(9) An application for protection of a layout‐design is subject to the payment of the prescribed fee.
(10) Where the fee is not paid, the Registrar shall notify the applicant that if the payment is not made within a prescribed period the application shall be treated as if it had not been filed.
Section 8—Registration and Publication
(1) The Registrar shall maintain a register in which matters required to be registered under this Act are registered.
(2) Where an application compares with the requirements of section 7, the Registrar shall register the layout‐design in the register without examination of the originality of the layout‐design, the applicant's entitlement to protection or the correctness of the facts stated in the application.
(3) The register shall contain the number, title, filing date, and where indicated in the application under section 7(3)(e), the date of first commercial exploitation anywhere in the world of the layout‐designs as well as the name and address of the right holder and other prescribed particulars.
(4) Any person may consult the register and obtain extracts from it after the payment of the prescribed fee.
(5) The Registrar shall publish the registration of any layout‐design registered under this Act in the prescribed manner.
Section 9—Right to Transfer; Rectification of Register
(1) Where the essential content of an application has been taken from the layout‐design of a person without the person's consent, that person may, in writing, request the Registrar to transfer the application to the person.
(2) Where the application has already resulted in a registration, that person may, in writing within three years from the publication of the registration, request the Registrar to transfer the registration to the person and to rectify the entry in the register
(3) The Registrar shall send a copy of the request to the right holder, and, within the prescribed period and in the prescribed manner, the right holder may send to the Registrar a counter‐statement of the grounds on which the person whose name for the time being appears in the register as the right holder relies.
(4) Where the right holder sends a counter‐statement, the Registrar shall furnish a copy of it to the person requesting the transfer and, after hearing the parties if either or both wish to be heard, and considering the merits of the case, decide whether the application or registration should be transferred and, where applicable, whether the register should be rectified.
Section 10—Changes in Ownership
(1) A change in the ownership of a protected layout‐design shall be in writing.
(2) Where the layout‐design is registered, a change in ownership shall, at the request of an interested party made to the Registrar, be recorded and published by the Registrar and the change shall have no effect against third parties until it has been recorded.
Section 11—Contractual Licences
A licence contract concerning a layout‐design shall, upon registration of the layout‐design, be submitted to the Registrar who shall keep its contents confidential but shall publish a reference to it and the licence contract shall have no effect against third parties until the submission has been made.
Section 12—Cancellation
(1) An interested person may apply to the Court for the cancellation of the registration of a layout‐design on the grounds that
(a) the layout‐design does not qualify as a layout‐design of an integrated circuit as provided for under this act;
(b) the layout‐design is not protectable under sections 1 and 2;
(c) the right holder is not entitled to protection under section 3; or
(d) where the layout‐design has been commercially exploited anywhere in the world, before the filing of the application for registration of the layout‐design, the application was not filed within the time limit referred to in sections 1(2) and 5(a).
(2) Where the grounds for cancellation are established with respect to only a part of the layout‐design, only the corresponding part of the registration shall be cancelled.
(3) A cancelled layout‐design registration or part of it is void from the date of the commencement of the protection.
(4) The Registrar of the Court shall notify the Registrar of the decision of the Court or the decision on any appeal and the Registrar shall record the decision and publish a reference to it as soon as possible.
Section 13—Representation
If the ordinary residence or principal place of business of an applicant under this Act is outside the country, the applicant shall be represented by a legal practitioner resident and practising in the country.
Section 14—Infringement; Enforcement of Exclusive Right
(1) Infringement shall consist of the performance of an act which is unlawful as mentioned in section 4.
(2) On the request of the right holder, or of the holder’s licensee if the licensee has requested the right holder to institute court proceedings for a specific relief and the right holder has refused or failed to do so within a reasonable time, the Court may grant an injunction to prevent infringement or an imminent infringement, award damages and grant any other remedy the court considers fit.
(3) Proceedings under subsection (2) may be initiated only after an application for registration of the layout‐design has been filed with the Registrar.
Section 15—Offence
A person who, without authorization knowingly performs any act which is unlawful under section 4 commits an offence and is liable on summary conviction to a fine not exceeding two thousand penalty units or to imprisonment for a term not exceeding two years and the court may also order the seizure, forfeiture and destruction of the layout‐designs, integrated circuits or articles concerned and of any materials or implements, predominantly used in the commission of the offence.
Section 16—Exploitation by a Government Agency or third Person
(1) Where
(a) the public interest, in particular, national security, nutrition, health or the development or other vital sectors of the national economy requires the exploitation of a protected layout‐design for public non‐commercial use, or
(b) a judicial or administrative body has determined that the manner of exploitation of a protected layout‐design, by the right holder or the right holder's licensee, is anti‐competitive and the Minister is satisfied that the exploitation of the layout‐design in accordance with this section would remedy that practice,
the Minister may decide that, without the authorization of the right holder, a Government agency or a third person designated by the Minister may exploit the layout‐design.
(2) The exploitation of a layout‐design under subsection (1) shall be
(a) limited, in scope and duration, to the purpose for which it was authorized;
(b) predominantly for the supply of the domestic market;
(c) non‐exclusive; and
(d) subject to the payment to the right holder of an adequate remuneration taking into account the economic value of the Minister's authorization, as determined in the Minister's decision and, where applicable, the need to correct anti‐competitive practices.
(3) Upon request of the right holder or of the beneficiary of the authorization, the Minister may, after hearing the parties, if either or both wish to be heard, vary the terms of the decision authorizing the exploitation of the layout‐design to the extent that changed circumstances justify the variation.
(4) Upon the request of the right holder, the Minister shall terminate the non‐voluntary licence if the Minister is satisfied that the circumstances which led to the Minister's decision have ceased to exist and are unlikely to recur or that the beneficiary of the authorization has failed to comply with the terms of the authorization.
(5) Notwithstanding subsection (4), the Minister shall not terminate an authorization if the Minister is satisfied that adequate protection of the legitimate interests of the beneficiary of the authorization justifies the maintenance of the authorization.
(6) Where a third persons is designated by the Minister in accordance with subsection (1), the authorization may only be transferred with the enterprise or business of the beneficiary of the authorization or with the part of the enterprise or business within which the layout‐design is being exploited.
(7) A request for the Minister's authorization shall be supported by evidence that the right holder has received, from the person seeking authorization, a request for a contractual licence but that, that person has been unable to obtain the licence on reasonable commercial terms and conditions and within a reasonable time.
(8) Any decision of the Minister under this section is subject to an appeal to the Court.
Section 17—Exercise of Discretionary Powers
The Registrar shall, in exercising a discretionary power conferred by this Act comply with the provisions of article 296 of the Constitution.
Section 18—Extension of time
(1) Where the Registrar is satisfied that the circumstances justify it, the Registrar may, upon receipt of a written request extend the time for doing any act, other than the time limit set out in sections 1(2) and 5(a), for filing an application or taking any proceeding under this Act, upon notice to the parties concerned and upon such terms as the Registrar may direct.
(2) The extension under subsection (1) may be granted not withstanding that the time for doing the act or taking the proceeding has expired.
Section 19—Appeals
A person may appeal to the Court against a decision taken by the Registrar under this Act.
Section 20—Application of international treaties
The provisions of an international treaty to which the country is a party shall apply to the matters dealt with by this Act and in case of a conflict with the provisions of this Act, the provisions of the International treaty shall prevail.
Section 21—Regulations
The Minister may by legislative instrument make Regulations for the effective implementation of this Act, and, in particular, prescribing
(a) the fees payable under this Act;
(b) the details of the requirements of application;
(c) the procedure for the publication of the registration of a layout‐design; and
(d) conditions of appeal.
Section 22—Interpretation
In this act, unless the context otherwise requires
"Court" means the High Court;
"integrated circuit" means a product, in its final form or an intermediate form in which the elements, at least one of which is an active element, and some or all of the interconnections are integrally formed in or on a piece of material and which is intended to perform an electronic function;
"layout‐design (topography)" means the three‐dimensional disposition, however expressed, of the elements, at least one which is an active element, and some or all of the interconnections of an integrated circuit or such a three‐dimensional disposition prepared for an integrated circuit intended for manufacture;
"Minister" means the Minister responsible for Justice;
"Register" means the register of Layout‐Designs (Topographies) of Integrated Circuits established under section 8;
"Registrar" means the Registrar‐General;
"right‐holder" means the natural person who, or the legal entity which, according to this Act is regarded as the beneficiary of the protection.
Date of Gazette Notification: 2nd April, 2004