المملكة المتحدة

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

STATUTORY INSTRUMENTS

2018 No. 1052

EXITING THE EUROPEAN UNION DESIGNS

The Design Right (Semiconductor Topographies) (Amendment) (EU Exit) Regulations 2018

Sift requirements satisfied 5th September 2018

Made - - - - 9th October 2018

Laid before Parliament 9th October 2018

Coming into force in accordance with regulation 1

The requirements of paragraph 3(2) of Schedule 7 to the European Union (Withdrawal) Act 2018(1) (relating to the appropriate Parliamentary procedure for these Regulations) have been satisfied. The Secretary of State makes the following Regulations in exercise of the powers conferred by section 8(1) of, and paragraph 21(b) of Schedule 7 to, that Act(2).

Citation and commencement

1. These Regulations may be cited as the Design Right (Semiconductor Topographies) (Amendment) (EU Exit) Regulations 2018 and come into force on exit day.

Amendment of the Design Right (Semiconductor Topographies) Regulations 1989

2.—(1) Regulation 4 (qualification) of the Design Right (Semiconductor Topographies) Regulations 1989(3) is amended as follows.

(2) In paragraph (2) for “another” substitute “a”. (3) In paragraph (4)—

(a) for “every member State of the European Economic Community” substitute “the United Kingdom”;

(b) for “any member State” substitute “the United Kingdom”; (c) omit from “and subsection (4)” to the end of the sentence.

(1) 2018 c.16. (2) See section 20(1) of that Act for a definition of “Minister of the Crown”. (3) S.I. 1989/1100, as amended by S.I. 2006/1833 and 2008/1434.

Document Generated: 2019-04-17 Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

9th October 2018

Sam Gyimah Minister of State for Universities, Science,

Research and Innovation Department for Business, Energy and Industrial

Strategy

2

Document Generated: 2019-04-17 Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

EXPLANATORY NOTE

(This note is not part of the Regulations)

These Regulations amend the Design Right (Semiconductor Topographies) Regulations 1989 in order to address failures of those Regulations to operate effectively and other deficiencies (in particular under sections 8(2)(a) and (g)) of the European Union (Withdrawal) Act 2018 (c.16)) arising from the withdrawal of the United Kingdom from the European Union. An impact assessment has not been published for this instrument as no, or no significant, impact on the private, public and voluntary sectors is foreseen. An explanatory memorandum is available alongside this instrument on the Legislation UK website at www.legislation.gov.ukand it may also be obtained from the Intellectual Property Office, Concept House, Cardiff Road, Duffryn, Newport, NP10 8QQ.

3