عن الملكية الفكرية التدريب في مجال الملكية الفكرية إذكاء الاحترام للملكية الفكرية التوعية بالملكية الفكرية الملكية الفكرية لفائدة… الملكية الفكرية و… الملكية الفكرية في… معلومات البراءات والتكنولوجيا معلومات العلامات التجارية معلومات التصاميم الصناعية معلومات المؤشرات الجغرافية معلومات الأصناف النباتية (الأوبوف) القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية مراجع الملكية الفكرية تقارير الملكية الفكرية حماية البراءات حماية العلامات التجارية حماية التصاميم الصناعية حماية المؤشرات الجغرافية حماية الأصناف النباتية (الأوبوف) تسوية المنازعات المتعلقة بالملكية الفكرية حلول الأعمال التجارية لمكاتب الملكية الفكرية دفع ثمن خدمات الملكية الفكرية هيئات صنع القرار والتفاوض التعاون التنموي دعم الابتكار الشراكات بين القطاعين العام والخاص أدوات وخدمات الذكاء الاصطناعي المنظمة العمل مع الويبو المساءلة البراءات العلامات التجارية التصاميم الصناعية المؤشرات الجغرافية حق المؤلف الأسرار التجارية أكاديمية الويبو الندوات وحلقات العمل إنفاذ الملكية الفكرية WIPO ALERT إذكاء الوعي اليوم العالمي للملكية الفكرية مجلة الويبو دراسات حالة وقصص ناجحة في مجال الملكية الفكرية أخبار الملكية الفكرية جوائز الويبو الأعمال الجامعات الشعوب الأصلية الأجهزة القضائية الموارد الوراثية والمعارف التقليدية وأشكال التعبير الثقافي التقليدي الاقتصاد التمويل الأصول غير الملموسة المساواة بين الجنسين الصحة العالمية تغير المناخ سياسة المنافسة أهداف التنمية المستدامة التكنولوجيات الحدودية التطبيقات المحمولة الرياضة السياحة ركن البراءات تحليلات البراءات التصنيف الدولي للبراءات أَردي – البحث لأغراض الابتكار أَردي – البحث لأغراض الابتكار قاعدة البيانات العالمية للعلامات مرصد مدريد قاعدة بيانات المادة 6(ثالثاً) تصنيف نيس تصنيف فيينا قاعدة البيانات العالمية للتصاميم نشرة التصاميم الدولية قاعدة بيانات Hague Express تصنيف لوكارنو قاعدة بيانات Lisbon Express قاعدة البيانات العالمية للعلامات الخاصة بالمؤشرات الجغرافية قاعدة بيانات الأصناف النباتية (PLUTO) قاعدة بيانات الأجناس والأنواع (GENIE) المعاهدات التي تديرها الويبو ويبو لكس - القوانين والمعاهدات والأحكام القضائية المتعلقة بالملكية الفكرية معايير الويبو إحصاءات الملكية الفكرية ويبو بورل (المصطلحات) منشورات الويبو البيانات القطرية الخاصة بالملكية الفكرية مركز الويبو للمعارف الاتجاهات التكنولوجية للويبو مؤشر الابتكار العالمي التقرير العالمي للملكية الفكرية معاهدة التعاون بشأن البراءات – نظام البراءات الدولي ePCT بودابست – نظام الإيداع الدولي للكائنات الدقيقة مدريد – النظام الدولي للعلامات التجارية eMadrid الحماية بموجب المادة 6(ثالثاً) (الشعارات الشرفية، الأعلام، شعارات الدول) لاهاي – النظام الدولي للتصاميم eHague لشبونة – النظام الدولي لتسميات المنشأ والمؤشرات الجغرافية eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange الوساطة التحكيم قرارات الخبراء المنازعات المتعلقة بأسماء الحقول نظام النفاذ المركزي إلى نتائج البحث والفحص (CASE) خدمة النفاذ الرقمي (DAS) WIPO Pay الحساب الجاري لدى الويبو جمعيات الويبو اللجان الدائمة الجدول الزمني للاجتماعات WIPO Webcast وثائق الويبو الرسمية أجندة التنمية المساعدة التقنية مؤسسات التدريب في مجال الملكية الفكرية الدعم المتعلق بكوفيد-19 الاستراتيجيات الوطنية للملكية الفكرية المساعدة في مجالي السياسة والتشريع محور التعاون مراكز دعم التكنولوجيا والابتكار نقل التكنولوجيا برنامج مساعدة المخترعين WIPO GREEN WIPO's PAT-INFORMED اتحاد الكتب الميسّرة اتحاد الويبو للمبدعين WIPO Translate أداة تحويل الكلام إلى نص مساعد التصنيف الدول الأعضاء المراقبون المدير العام الأنشطة بحسب كل وحدة المكاتب الخارجية المناصب الشاغرة المشتريات النتائج والميزانية التقارير المالية الرقابة
Arabic English Spanish French Russian Chinese
القوانين المعاهدات الأحكام التصفح بحسب الاختصاص القضائي

اللوائح بشأن الرسوم والنماذج الصناعية (بصيغتها المعدلة) لعام 2004 (رقم 574 لعام 2004)، إيرلندا

عودة للخلف
أحدث إصدار في ويبو لِكس
التفاصيل التفاصيل سنة الإصدار 2004 تواريخ بدء النفاذ : 1 نوفمبر 2004 نص صادر : 29 سبتمبر 2004 نوع النص اللوائح التنفيذية الموضوع التصاميم الصناعية ملاحظات تنص هذه اللوائح التنفيذية على تعديل لائحة الرسوم والنماذج الصناعية لعام 2002 (رقم 280 لعام 2002) عن طريق إزالة شرط النموذجين 1 و1(أ) من الجدول الزمني لبيان الجدة والطابع الفردي في طلب تسجيل الرسوم والنماذج. وتنقح هذه اللوائح أيضا شكل شهادة تسجيل الرسوم الصناعية التي يُصدرها مراقب البراءات والرسوم والنماذج والعلامات التجارية. وأزيلت من الشكل المنقح الإشارة إلى شرط الحصول على قائمة المنتج في شهادة تسجيل.

المواد المتاحة

النصوص الرئيسية النصوص ذات الصلة
النصوص الرئيسية النصوص الرئيسية بالإنكليزية Industrial Designs (Amendment) Regulations 2004 (S.I. No. 574/2004)        
 Industrial Designs (Amendment) Regulations 2004

STATUTORY INSTRUMENTS.

S.I. No. 574 of 2004 .

INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2004

S.I. No. 574 of 2004 .

INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2004.

I, MICHAEL AHERN, Minister of State at the Department of Enterprise, Trade and Employment, in exercise of the powers conferred on me by sections 20(1), 30(1), 31(1) and 85 of the Industrial Designs Act 2001 (No. 39 of 2001) and the Enterprise, Trade and Employment (Delegation of Ministerial Functions) (No. 2) Order 2003 ( S.I. No. 157 of 2003 ), hereby make the following regulations:

1. These Regulations may be cited as the Industrial Designs (Amendment) Regulations 2004.

2. These Regulations come into operation on 1 November 2004.

3. The Industrial Designs Regulations 2002 ( S.I. No. 280 of 2002 ) are amended—

(a) in Regulation 22(d), by deleting “and of its feature or features of novelty and individual character”,

(b) in Regulation 24(f), by deleting “and of the feature or features of novelty and individual character claimed”, and

(c) in Schedule 2, by substituting—

(i) Form No. 1 in the Schedule to these Regulations for Form No. 1,

(ii) Form No. 1A in the Schedule to these Regulations for Form No. 1A, and

(iii) Form No. 2 in the Schedule to these Regulations for Form No. 2.

SCHEDULE

FORM No. 1

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN

SINGLE APPLICATION Reference No. of Applicant

or Authorised Agent.................................................

To: The Controller of Patents, Designs and Trade Marks,

Patents Office,

Government Buildings,

Hebron Road,

Kilkenny.

The Applicant(s) named herein hereby claim(s) to be the proprietor(s) of the design, a representation of which is attached, and request(s) the registration of the design on the basis of the following information:

1. Type of Application

This is a single application in respect of one design.

2. Fees

Included with this application is the prescribed fee of €70 or evidence of payment thereof.

3. Representations

A representation of the design complying with the conditions set out in Regulation 11 is enclosed.

Yes [ ]

No [ ]

4. Applicant(s)

Full name(s):

Address(es):

Nationality(ies):

5. Author

If the author(s) is/are not the first proprietor(s) of the design, insert here the Design Identification Number, name(s) and address(es) of the author(s).

Design Identification Number:

Full name(s):

Address(es):

6. Brief description of design

Insert here a brief description of the design.

7. Product(s)

List here the product(s) to or in which the design is to be applied or incorporated.

8. Class(es)

List here the class(es) including subclass(es) of the Locarno system of International Classification in which registration of the design is requested.

9. Claim for right of Priority

Complete this section where a right of priority is claimed on the basis of an earlier application for registration of the design that was filed in a state, country, territory or area within the meaning of section 26 of the Industrial Designs Act 2001 (“the Principal Act”).

State/Country/Territory/Area Filing Date

File No. (if available)

10. Deferment of Publication

Is deferment of publication as provided for in section 32(2) of the Principal Act requested?

Yes [ ]

No [ ]

If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority).

Period of Deferment

11. Authorised Agent (if any)

The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration:

Name of Agent:

Address:

12. Address for Service (indicate and complete as appropriate)

Same as at 11.

If not the same as at 11, state hereunder the address for service.

13. Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the Agent named at 11).

Date:

FORM No. 1A

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN

MULTIPLE APPLICATION Reference No. of Applicant

or Authorised Agent.................................................

To: The Controller of Patents, Designs and Trade Marks,

Patents Office,

Government Buildings,

Hebron Road,

Kilkenny.

The Applicant(s) named herein hereby claim(s) to be the proprietor(s) of the designs, representations of which are attached, and requests the registration of the designs on the basis of the following information:

1. Type of Application

This is a multiple application covering designs.

2. Fees

Included with this application is the prescribed fee of €

(or evidence of payment thereof) which comprises an application fee of €70 and an additional fee of €25 for each design included in the application.

3. Representations

Separate representations of each of the designs, complying with the conditions set out in Regulation 11, are enclosed.

Yes [ ]

No [ ]

[IMPORTANT — PLEASE NOTE: THE REPRESENTATIONS ENCLOSED WITH THIS APPLICATION MUST BE NUMBERED CONSECUTIVELY USING ARABIC NUMERALS INSERTED ON THE BACK OR REVERSE SIDE OF THE REPRESENTATIONS. THESE NUMERALS ARE REQUIRED TO IDENTIFY AND DISTINGUISH THE DESIGNS IN RESPECT OF WHICH REGISTRATION IS REQUESTED. WHERE MORE THAN ONE REPRESENTATION OF A PARTICULAR DESIGN IS SUBMITTED, EACH OF THE REPRESENTATIONS OF THAT DESIGN SHOULD BE ASSIGNED THE SAME IDENTIFICATION NUMERAL.]

4. Applicant(s)

Full name(s):

Address(es):

Nationality(ies):

5. Author(s)

If the author(s) is/are not the first proprietor(s) of the designs, insert here the Design Identification Numeral(s) and the name(s) and address(es) of the author(s). If there is more than one author indicate the design identification numeral of each design (see 3 above) opposite the name of each author.

Design Identification Numeral Name of author(s) Address(es)

6. Brief description of designs

Insert here a brief description of the designs. If you need to provide separate descriptions of each of the designs included in the application, indicate the design identification numeral of each design opposite each of the descriptions provided.

Design Identification Numeral Description

7. Product(s)

List here the product(s) to or in which the designs are to be applied or incorporated. If the different designs included in the application are to be applied to or incorporated in different products, indicate the design identification numeral of each design opposite each of the products listed.

Design Identification Numeral Description

8. Class(es)

List here the class(es) including the subclass(es) of the Locarno system of International Classification in which registration of the design(s) is/are requested.

[Note: Except in cases of ornamentation, all of the designs in a multiple application for registration must be in respect of products that belong to the same class of the Locarno system of International Classification.]

Design Identification Numeral Class Sub-class

9. Claim for right of Priority

Complete this section where a right of priority is claimed on the basis of an earlier application for registration of the design(s) that was filed in a state, country, territory or area within the meaning of section 26 of the Industrial Designs Act 2001 (“the Principal Act”). If there are different claims to priority in respect of the different designs included in the application, indicate the design identification numeral of each design opposite each of the claims listed.

Design Identification Numeral

State/Country/ Territory/Area

Filing Date

File No. (if available)

10. Deferment of Publication

Is deferment of publication as provided for in section 32(2) of the Principal Act requested?

Yes [ ]

No [ ]

If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority).

Design Identification Numeral Period of Deferment

11. Authorised Agent (if any)

The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration:

Name of Agent:

Address:

12. Address for Service (indicate and complete as appropriate)

Same as at 11.

If not the same as at 11, state hereunder the address for service.

13. Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the Agent named at 11).

Date:

FORM No. 2

INDUSTRIAL DESIGNS ACT 2001

CERTIFICATE OF REGISTRATION OF A DESIGN

It is hereby certified that the design to which this certificate relates (representation attached) has been registered in the Register of Designs in the name of............................................................ 

(registered proprietor) at ............................................................  ..............................................

............................................................  ............................................................ 

..........(address)

under registration No.............in respect of certain products in class(es) and sub-class(es)

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

This design has been registered as of ............................................................  ............................

Dated this day of 2 .

............................................................  ................................................

Controller of Patents, Designs and Trade Marks.

Given under my Hand, 29th September 2004.

MICHAEL AHERN,

Minister of State at the Department of Enterprise, Trade and Employment.

EXPLANATORY NOTE.

(This note is not part of the Instrument and does not purport to be a legal interpretation.)

These Regulations amend the Industrial Designs Regulations 2002 ( S.I. No 280 of 2002 ) by removing the requirement to forms 1 and 1A of the Schedule for a statement of novelty and individual character in the application for registration of a design. These Regulations also revise the format of the Certificate of Registration for a design, which is issued by the Controller of Patents, Designs and Trade Marks upon registration of a design. The revised format has removed the reference to and requirement for a product listing on the Certificate of Registration.

النصوص الإضافية ورقة غلاف الإخطار الموجه إلى منظمة التجارة العالمية (3 نصوص) ورقة غلاف الإخطار الموجه إلى منظمة التجارة العالمية (3 نصوص) بالفرنسية Règlement de 2004 portant modification du règlement sur les dessins et modèles industriels (S.I. n° 574/2004) بالإسبانية Reglamento de 2004 que modifica el Reglamento sobre las Diseños Industriales (S.I. N° 574/2004) بالإنكليزية Industrial Designs (Amendment) Regulations 2004 (S.I. No. 574/2004)
 Industrial Designs (Amendment) Regulations 2004

STATUTORY INSTRUMENTS.

S.I. No. 574 of 2004 .

INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2004

S.I. No. 574 of 2004 .

INDUSTRIAL DESIGNS (AMENDMENT) REGULATIONS 2004.

I, MICHAEL AHERN, Minister of State at the Department of Enterprise, Trade and Employment, in exercise of the powers conferred on me by sections 20(1), 30(1), 31(1) and 85 of the Industrial Designs Act 2001 (No. 39 of 2001) and the Enterprise, Trade and Employment (Delegation of Ministerial Functions) (No. 2) Order 2003 ( S.I. No. 157 of 2003 ), hereby make the following regulations:

1. These Regulations may be cited as the Industrial Designs (Amendment) Regulations 2004.

2. These Regulations come into operation on 1 November 2004.

3. The Industrial Designs Regulations 2002 ( S.I. No. 280 of 2002 ) are amended—

(a) in Regulation 22(d), by deleting “and of its feature or features of novelty and individual character”,

(b) in Regulation 24(f), by deleting “and of the feature or features of novelty and individual character claimed”, and

(c) in Schedule 2, by substituting—

(i) Form No. 1 in the Schedule to these Regulations for Form No. 1,

(ii) Form No. 1A in the Schedule to these Regulations for Form No. 1A, and

(iii) Form No. 2 in the Schedule to these Regulations for Form No. 2.

SCHEDULE

FORM No. 1

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN

SINGLE APPLICATION Reference No. of Applicant

or Authorised Agent.................................................

To: The Controller of Patents, Designs and Trade Marks,

Patents Office,

Government Buildings,

Hebron Road,

Kilkenny.

The Applicant(s) named herein hereby claim(s) to be the proprietor(s) of the design, a representation of which is attached, and request(s) the registration of the design on the basis of the following information:

1. Type of Application

This is a single application in respect of one design.

2. Fees

Included with this application is the prescribed fee of €70 or evidence of payment thereof.

3. Representations

A representation of the design complying with the conditions set out in Regulation 11 is enclosed.

Yes [ ]

No [ ]

4. Applicant(s)

Full name(s):

Address(es):

Nationality(ies):

5. Author

If the author(s) is/are not the first proprietor(s) of the design, insert here the Design Identification Number, name(s) and address(es) of the author(s).

Design Identification Number:

Full name(s):

Address(es):

6. Brief description of design

Insert here a brief description of the design.

7. Product(s)

List here the product(s) to or in which the design is to be applied or incorporated.

8. Class(es)

List here the class(es) including subclass(es) of the Locarno system of International Classification in which registration of the design is requested.

9. Claim for right of Priority

Complete this section where a right of priority is claimed on the basis of an earlier application for registration of the design that was filed in a state, country, territory or area within the meaning of section 26 of the Industrial Designs Act 2001 (“the Principal Act”).

State/Country/Territory/Area Filing Date

File No. (if available)

10. Deferment of Publication

Is deferment of publication as provided for in section 32(2) of the Principal Act requested?

Yes [ ]

No [ ]

If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority).

Period of Deferment

11. Authorised Agent (if any)

The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration:

Name of Agent:

Address:

12. Address for Service (indicate and complete as appropriate)

Same as at 11.

If not the same as at 11, state hereunder the address for service.

13. Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the Agent named at 11).

Date:

FORM No. 1A

INDUSTRIAL DESIGNS ACT 2001

APPLICATION FOR REGISTRATION OF A DESIGN

MULTIPLE APPLICATION Reference No. of Applicant

or Authorised Agent.................................................

To: The Controller of Patents, Designs and Trade Marks,

Patents Office,

Government Buildings,

Hebron Road,

Kilkenny.

The Applicant(s) named herein hereby claim(s) to be the proprietor(s) of the designs, representations of which are attached, and requests the registration of the designs on the basis of the following information:

1. Type of Application

This is a multiple application covering designs.

2. Fees

Included with this application is the prescribed fee of €

(or evidence of payment thereof) which comprises an application fee of €70 and an additional fee of €25 for each design included in the application.

3. Representations

Separate representations of each of the designs, complying with the conditions set out in Regulation 11, are enclosed.

Yes [ ]

No [ ]

[IMPORTANT — PLEASE NOTE: THE REPRESENTATIONS ENCLOSED WITH THIS APPLICATION MUST BE NUMBERED CONSECUTIVELY USING ARABIC NUMERALS INSERTED ON THE BACK OR REVERSE SIDE OF THE REPRESENTATIONS. THESE NUMERALS ARE REQUIRED TO IDENTIFY AND DISTINGUISH THE DESIGNS IN RESPECT OF WHICH REGISTRATION IS REQUESTED. WHERE MORE THAN ONE REPRESENTATION OF A PARTICULAR DESIGN IS SUBMITTED, EACH OF THE REPRESENTATIONS OF THAT DESIGN SHOULD BE ASSIGNED THE SAME IDENTIFICATION NUMERAL.]

4. Applicant(s)

Full name(s):

Address(es):

Nationality(ies):

5. Author(s)

If the author(s) is/are not the first proprietor(s) of the designs, insert here the Design Identification Numeral(s) and the name(s) and address(es) of the author(s). If there is more than one author indicate the design identification numeral of each design (see 3 above) opposite the name of each author.

Design Identification Numeral Name of author(s) Address(es)

6. Brief description of designs

Insert here a brief description of the designs. If you need to provide separate descriptions of each of the designs included in the application, indicate the design identification numeral of each design opposite each of the descriptions provided.

Design Identification Numeral Description

7. Product(s)

List here the product(s) to or in which the designs are to be applied or incorporated. If the different designs included in the application are to be applied to or incorporated in different products, indicate the design identification numeral of each design opposite each of the products listed.

Design Identification Numeral Description

8. Class(es)

List here the class(es) including the subclass(es) of the Locarno system of International Classification in which registration of the design(s) is/are requested.

[Note: Except in cases of ornamentation, all of the designs in a multiple application for registration must be in respect of products that belong to the same class of the Locarno system of International Classification.]

Design Identification Numeral Class Sub-class

9. Claim for right of Priority

Complete this section where a right of priority is claimed on the basis of an earlier application for registration of the design(s) that was filed in a state, country, territory or area within the meaning of section 26 of the Industrial Designs Act 2001 (“the Principal Act”). If there are different claims to priority in respect of the different designs included in the application, indicate the design identification numeral of each design opposite each of the claims listed.

Design Identification Numeral

State/Country/ Territory/Area

Filing Date

File No. (if available)

10. Deferment of Publication

Is deferment of publication as provided for in section 32(2) of the Principal Act requested?

Yes [ ]

No [ ]

If yes, please indicate the period for which deferment is requested (the maximum period allowed is 30 months from the filing date or, if priority is claimed, from the date of priority).

Design Identification Numeral Period of Deferment

11. Authorised Agent (if any)

The following has been authorised to act on behalf of the Applicant(s) in all proceedings connected with this application for registration:

Name of Agent:

Address:

12. Address for Service (indicate and complete as appropriate)

Same as at 11.

If not the same as at 11, state hereunder the address for service.

13. Signature

(The application may be signed by a person authorised to do so by or on behalf of the Applicant(s) or by the Agent named at 11).

Date:

FORM No. 2

INDUSTRIAL DESIGNS ACT 2001

CERTIFICATE OF REGISTRATION OF A DESIGN

It is hereby certified that the design to which this certificate relates (representation attached) has been registered in the Register of Designs in the name of............................................................ 

(registered proprietor) at ............................................................  ..............................................

............................................................  ............................................................ 

..........(address)

under registration No.............in respect of certain products in class(es) and sub-class(es)

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

............................................................  ............................................................ 

........................

This design has been registered as of ............................................................  ............................

Dated this day of 2 .

............................................................  ................................................

Controller of Patents, Designs and Trade Marks.

Given under my Hand, 29th September 2004.

MICHAEL AHERN,

Minister of State at the Department of Enterprise, Trade and Employment.

EXPLANATORY NOTE.

(This note is not part of the Instrument and does not purport to be a legal interpretation.)

These Regulations amend the Industrial Designs Regulations 2002 ( S.I. No 280 of 2002 ) by removing the requirement to forms 1 and 1A of the Schedule for a statement of novelty and individual character in the application for registration of a design. These Regulations also revise the format of the Certificate of Registration for a design, which is issued by the Controller of Patents, Designs and Trade Marks upon registration of a design. The revised format has removed the reference to and requirement for a product listing on the Certificate of Registration.


التشريعات يُعدّل (1 نصوص) يُعدّل (1 نصوص) مرجع وثيقة منظمة التجارة العالمية
IP/N/1/IRL/90
IP/N/1/IRL/D/7
لا توجد بيانات متاحة.

ويبو لِكس رقم IE131