Об интеллектуальной собственности Обучение в области ИС Обеспечение уважения интеллектуальной собственности Информационно-просветительская работа в области ИС ИС для ИС и ИС в области Информация о патентах и технологиях Информация о товарных знаках Информация о промышленных образцах Информация о географических указаниях Информация о новых сортах растений (UPOV) Законы, договоры и судебные решения в области ИС Ресурсы в области ИС Отчеты в области ИС Патентная охрана Охрана товарных знаков Охрана промышленных образцов Охрана географических указаний Охрана новых сортов растений (UPOV) Разрешение споров в области ИС Деловые решения для ведомств ИС Оплата услуг в области ИС Органы по ведению переговоров и директивные органы Сотрудничество в целях развития Поддержка инновационной деятельности Государственно-частные партнерства Инструменты и сервисы на базе ИИ Организация Работа с ВОИС Подотчетность Патенты Товарные знаки Промышленные образцы Географические указания Авторское право Коммерческая тайна Академия ВОИС Практикумы и семинары Защита прав ИС WIPO ALERT Информационно-просветительская работа Международный день ИС Журнал ВОИС Тематические исследования и истории успеха Новости ИС Премии ВОИС Бизнеса Университетов Коренных народов Судебных органов Генетические ресурсы, традиционные знания и традиционные выражения культуры Экономика Финансирование Нематериальные активы Гендерное равенство Глобальное здравоохранение Изменение климата Политика в области конкуренции Цели в области устойчивого развития Передовых технологий Мобильных приложений Спорта Туризма PATENTSCOPE Патентная аналитика Международная патентная классификация ARDI – исследования в интересах инноваций ASPI – специализированная патентная информация Глобальная база данных по брендам Madrid Monitor База данных Article 6ter Express Ниццкая классификация Венская классификация Глобальная база данных по образцам Бюллетень международных образцов База данных Hague Express Локарнская классификация База данных Lisbon Express Глобальная база данных по ГУ База данных о сортах растений PLUTO База данных GENIE Договоры, административные функции которых выполняет ВОИС WIPO Lex – законы, договоры и судебные решения в области ИС Стандарты ВОИС Статистика в области ИС WIPO Pearl (терминология) Публикации ВОИС Страновые справки по ИС Центр знаний ВОИС Серия публикаций ВОИС «Тенденции в области технологий» Глобальный инновационный индекс Доклад о положении в области интеллектуальной собственности в мире PCT – международная патентная система Портал ePCT Будапештская система – международная система депонирования микроорганизмов Мадридская система – международная система товарных знаков Портал eMadrid Cтатья 6ter (гербы, флаги, эмблемы) Гаагская система – система международной регистрации образцов Портал eHague Лиссабонская система – международная система географических указаний Портал eLisbon UPOV PRISMA UPOV e-PVP Administration UPOV e-PVP DUS Exchange Посредничество Арбитраж Вынесение экспертных заключений Споры по доменным именам Система централизованного доступа к результатам поиска и экспертизы (CASE) Служба цифрового доступа (DAS) WIPO Pay Текущий счет в ВОИС Ассамблеи ВОИС Постоянные комитеты График заседаний WIPO Webcast Официальные документы ВОИС Повестка дня в области развития Техническая помощь Учебные заведения в области ИС Поддержка в связи с COVID-19 Национальные стратегии в области ИС Помощь в вопросах политики и законодательной деятельности Центр сотрудничества Центры поддержки технологий и инноваций (ЦПТИ) Передача технологий Программа содействия изобретателям (IAP) WIPO GREEN PAT-INFORMED ВОИС Консорциум доступных книг Консорциум «ВОИС для авторов» WIPO Translate для перевода Система для распознавания речи Помощник по классификации Государства-члены Наблюдатели Генеральный директор Деятельность в разбивке по подразделениям Внешние бюро Вакансии Закупки Результаты и бюджет Финансовая отчетность Надзор
Arabic English Spanish French Russian Chinese
Законы Договоры Решения Просмотреть по юрисдикции

Законы и подзаконные акты, принятые в развитие положений Закона «Об охране промышленных образцов», Эстония

Назад
Предшествующая редакция  Перейти к последней редакции на WIPO Lex
Подробности Подробности Год версии 1998 Даты вступление в силу: 1 февраля 1998 г. Принят: 8 января 1998 г. Тип текста Имплементационные правила/положения Предмет Промышленные образцы, Регулирующие органы в области ИС

Имеющиеся тексты

Основной текст(-ы) Смежный текст(ы)
Основной(ые) текст(ы) Основной(ые) текст(ы) Английский Regulation No. 1 of the Minister of Economic Affairs of January 8, 1998, on the Establishment of Legislation Arising from the Industrial Design Protection Act        
 Regulation No. 1 of the Minister of Economic Affairs of January 8, 1998, on the Establishment of Legislation Arising from the Industrial Design Protection Act

Establishment of Legislation Arising from the Industrial Design Protection Act �

Regulation No. 1 of the Minister of Economic Affairs of 8 January 1998

1(RTL 1998, 14/15, 106),

entered into force 1 February 1998.

2 Pursuant to subsections 20 (3) and 24 (8) of the Industrial Design Protection Act (RT I

1997, 87, 1466; 1998, 108/109, 1783) and Government of the Republic regulation No.

260 of 30 December 1997 (RT I 1998, 1, 4), I resolve:

To approve the “Formal and Substantive Requirements for Application

Documents for Registration of Industrial Designs and Procedure for Filing of such

Documents” (annexed).

Approved by

Regulation No. 1 of the Minister of Economic Affairs of 8 January 1998

Formal and Substantive Requirements for Application Documents for Registration of

Industrial Designs and Procedure for Filing of such Documents

Pursuant to the Industrial Design Protection Act (hereinafter Act), upon registration of

industrial designs in the Republic of Estonia, the application or registration system

applies. In the application of the registration system, the Patent Office shall not verify the

novelty and individual character of an industrial design or whether the industrial design

may be used for manufacturing industrial or handicraft products. The owner of an

industrial design is responsible for the novelty and individual character of the design and

shall guarantee that the design may be used for manufacturing industrial or handicraft

products.

Part 1

Formal and Substantive Requirements for Application Documents for Registration of

Industrial Designs

1. Application documents for registration of industrial designs

1.1. An application for the registration of an industrial design (hereinafter registration

application), the variants of an industrial design or a set of industrial designs, shall consist

of the following documents:

1) a request for the registration of an industrial design;

2) a representation of the industrial design; �

3) a document certifying payment of the state fee; �

4) an authorisation document if the application is filed via a patent agent or if the � applicants have a joint representative; �

5) documents certifying priority claim if priority is claimed. �

1.2. A registration application may be accompanied by a description explaining the

industrial design.

2. Number of copies of documents

A request for the registration of an industrial design and the representation(s) of the

design, the variants of an industrial design or a set of industrial designs, shall be

submitted in three original copies. Other documents shall be submitted in a single copy.

3. Request for registration of industrial design

3.1. General requirements

3.1.1. A request for the registration of an industrial design shall set out the information

specified in § 21 of the Act. The form of the request is provided in the Annex to this

Procedure.

3.1.2. Information which cannot be supplied in the space provided in the data fields of the

request for the registration of an industrial design may be submitted on an additional

sheet of paper signed by the same person who signs the request for the registration of the

industrial design pursuant to clause 3.12 of this Procedure.

3.2. Name of industrial design

3.2.1. The name of an industrial design shall be provided in data field 1. It is

recommended that the terminology of the list of goods of the international classification

for industrial designs be used in the names of industrial designs.

3.2.2. The name shall be provided in the singular, except in cases where the term used has

no singular, for example “spectacles”, “scissors”, etc.

3.2.3. The name shall not be shortened and abbreviations shall not be used.

3.2.4. The numbers of the classes and subclasses of the Locarno Agreement Establishing

an International Classification for Industrial Designs (RT II 1996, 23, 87) to which the

industrial design belongs may also be indicated in data field 1.

3.3. Information concerning applicant �

3.3.1. Information concerning the applicant shall be provided in data field 2 of the request

for the registration of an industrial design.

3.3.2. It must be clearly evident from a request for the registration of an industrial design

whether the applicant is a natural or legal person.

3.3.3. Information concerning a natural person shall consist of the given name, surname

and residential address of the person. It is recommended that a phone number and/or fax

number be included. If it is not evident from the name of a natural person which part of

the name is the given name and which part is the surname, the surname shall be

underlined or provided in capital letters.

3.3.4. Information concerning a legal person shall consist of the full or abbreviated name

of the legal person which is entered in the commercial register or in another official

register pursuant to the law of the home country of the legal person and the full address

of the seat of the legal person. The seat of a legal person is the place where its

management board or a substituting body thereof is located.

3.3.5. If there are several applicants, information concerning all applicants shall be

submitted.

3.3.6. If the residence or seat of an applicant is located outside of Estonia, the name of the

country or the two­letter code thereof pursuant to Standard ST. 3 of the World

Intellectual Property Organization (hereinafter WIPO) for the identification of countries

shall be indicated in the address.

3.3.7. If the applicant is a person of a federal state, the federated state shall be indicated

in the address in addition to the country; the name of the city or other settlement shall be

underlined or indicated in some other manner.

3.3.8. An applicant is required to notify the Patent Office of any changes to the

information concerning the applicant during the processing of the application. In the

absence of such notification, the information known to the Patent Office shall be used in

the processing.

3.4. Information concerning representative of applicant

3.4.1. Data field 3 shall be completed only if the applicant is represented by a patent

agent in filing the registration application or performing procedures with the Patent

Office, or if several applicants are represented by a joint representative.

3.4.2. In the case of a joint representative, only the name of the natural or legal person

shall be entered in the data field. The name of a joint representative shall be identical

with the name of the joint representative as it is entered in data field 2 as the name of the

applicant.

3.4.3. Information concerning a patent agent shall consist of his or her given name and

surname. It is recommended that a postal address, the registration number of the patent

agent in the state register of Estonian patent agents and a phone number and/or fax

number be included; in the absence of a phone number and/or fax number, a

corresponding notation shall be made.

3.4.4. If both the names of a joint representative and a patent agent are provided in the

data field, the patent agent is deemed to be the representative of the applicants.

3.5. Correspondence data

3.5.1. Data field 4 shall be completed if the registration application is filed and

procedures related to registration are performed by the applicant or, in the case of several

applicants, by a joint representative. Information concerning the applicant or the joint

representative shall also be indicated in the data field if the information concerning a

patent agent is indicated in data field 3 but the patent agent is not authorised to receive

written communications from the Patent Office or exchange oral information.

3.5.2. If the applicant is a natural person or, in the case of several applicants, the joint

representative is a natural person, the name and postal address of such person shall be

indicated in data field 4.

3.5.3. If the applicant is a legal person or, in the case of several applicants, the joint

representative is a legal person, the name and postal address of the legal person shall be

indicated in data field 4. It is recommended that a phone number and/or fax number be

included.

3.5.4. If data field 4 is not completed, contains incorrect information or mistakes, the

Patent Office shall send communications to the joint representative indicated in data field

3 or, in the absence thereof, to the applicant indicated in data field 2. If, in the case of

several applicants, a joint representative is not indicated, communications shall be sent to

the applicant indicated first in data field 2 at the address of the residence or seat of the

applicant. If there are persons among the applicants whose residence or seat is in the

Republic of Estonia and persons whose residence or seat is in a foreign country,

communications shall be sent to the person whose residence or seat is in the Republic of

Estonia and who is indicated first in data field 2.

3.6. Information concerning author

3.6.1. The given name, surname and residential address of the author shall be indicated in

data field 5.

3.6.2. If there are several authors, the information specified in clause 3.6.1. concerning all

authors shall be indicated in data field 5.

3.6.3. If the author is also the applicant, only the given name and surname of the author

or the word “taotleja” [applicant] need to be written in the data field. In such case, the

address is not required.

3.6.4. An author who wishes not to disclose his or her name as the author and/or his or

her residential address shall complete data field 6.

3.7. Information concerning acquisition of right to apply for registration of industrial

design

Legal basis of applying for the registration pursuant to § 14 of the Act and becoming the

owner of an industrial design shall be indicated in data field 7 by marking the appropriate

box.

3.8. Priority claim

3.8.1. If data field 8 is completed, priority is deemed to be claimed. The data field shall

be completed if the applicant wishes to use the opportunities provided for in § 11 of the

Act to establish priority.

3.8.2. If, pursuant to subsection 11 (2) of the Act, priority is claimed on the basis of a first

registration application filed in a State party to the Paris Convention for the Protection of

Industrial Property or a first registration application filed in a state which is not a state

party to the Paris Convention for the Protection of Industrial Property, the filing date of

the first application, the number of the application and the name of the country or a two­

letter code for the identification of countries according to Standard ST. 3 of WIPO shall

be indicated in the data field.

3.8.3. If the applicant does not know the number of the first registration application on

the filing date of the registration application with the Patent Office, the applicant shall

indicate only the date and country of filing the first application in the priority claim.

3.8.4. If, pursuant to subsection 11 (3) of the Act, priority is claimed on the basis of an

application which is filed for the registration of an identical industrial design after the

first registration application, the number and filing date of the registration application

which is filed after the first application shall be indicated in the data field.

3.9. Request for suspension of processing of registration application of industrial design

Data field 9 shall be completed if the applicant wishes to suspend the processing of a

registration application.

3.10. Information concerning state fee

The amount and method of payment of the state fee paid and the number and date of the

document certifying payment of the state fee shall be indicated in data field 10.

3.11. Information concerning annexes

In data field 11, the appropriate boxes shall be marked according to the documents

included in the registration application. The number of pages and original copies of each

document shall also be indicated. If a registration application contains a document which

is not listed, the list shall be supplemented by adding the name, number of pages and

original copies of the document.

3.12. Signature

3.12.1. A request for the registration of an industrial design shall be signed by the

applicant, or a patent agent if he or she has authorisation. If there are several applicants,

all applicants or a patent agent shall sign the request.

3.12.2. If a signature is not legible, a deciphered form of the signature shall be added

thereto. If the applicant is a legal person, the title of the competent official shall be

included.

3.12.3. When signing a request, the place and date of signing shall be indicated.

3.12.4. A signature on an additional sheet of paper shall be in compliance with the

requirements provided for in clauses 3.12.2 and 3.12.3 of this Procedure.

4. Representation

4.1. A registration application shall contain a representation (photos, drawings) which

shall give a clear and complete depiction of the industrial design.

4.2. A representation of an industrial design shall contain the perspective view of the

industrial design and other views which are necessary for a clear and complete

impression of the industrial design.

4.3. A representation of a variant of an industrial design shall contain the perspective

view of the variant of the industrial design and other views which are necessary for a

clear and complete impression of the variant of the industrial design.

4.4. A representation of a set of industrial designs shall contain the perspective view of

the set of industrial designs and other views which are necessary for a clear and complete

impression of the set of industrial designs as a whole.

4.5. Where registration of an industrial design in colour is applied for, the representation

shall be in colour.

5. State fee

5.1. A state fee shall be paid upon the filing of a registration application.

5.2. The name of the industrial design and the number of receipt of the registration

application, if the applicant knows the latter, shall be indicated on the document

certifying payment of the state fee (payment order, receipt, etc. ).

5.3. If a registration application contains more than two variants of an industrial design, a

supplementary state fee shall be paid upon filing the registration application for every

variant commencing with the third variant.

5.4. The document certifying payment of the state fee shall generally be submitted for

each registration application separately. If state fees paid at once for the filing of several

registration applications are paid at the same time, the name of the industrial design or the

number of receipt of the registration application and the amount of the state fee paid shall

be indicated in the document certifying payment of the state fee concerning each

registration application.

5.5. The state fee is deemed to be paid upon receipt of a document by the Patent Office

certifying payment of the state fee.

6. Authorisation document

6.1. An authorisation document is issued to a patent agent or several patent agents or, if

the applicants have a joint representative, to the joint representative for the filing of a

registration application or performance of all or certain procedures related to the

registration or continued validity of an industrial design.

6.2. If an authorisation document is issued to several patent agents, each of them may

represent the applicant separately unless otherwise provided in the authorisation

document.

6.3. An authorisation document shall set out the following:

1) the given name, surname and residential address of the person represented if the

person is a natural person, or the name and address of the seat of the person represented if

the person is a legal person;

2) in the case of a patent agent, the given name and surname of the patent agent;

3) in the case of a joint representative who is a natural person, the given name and

surname of the representative or, in the case of a joint representative who is a legal

person, the name of the representative.

4) the scope of the authorisation;

5) the term of the authorisation, if the authorisation is granted for a specified term; �

6) the signature of the person represented;

7) the place and date of issue of the authorisation document.

6.4. An authorisation document shall be signed by the applicant. If there are several

applicants, all of them shall sign the authorisation document. An authorisation document

shall be signed pursuant to clause 3.12.2 of this Procedure.

6.5. Notarisation or legalisation of an authorisation document is not required.

6.6. If the term of an authorisation is not indicated in the authorisation document, the

authorisation is deemed to be granted for an unspecified term.

6.7. An authorisation document may be issued on the basis of the right to delegate

authority if the right to delegate authority is granted in the initial authorisation document.

Authority shall not be delegated in the extent exceeding authority granted by the initial

authorisation document. The term of delegated authority shall not exceed the term of the

initial authorisation document. The place and time of signing the initial authorisation

document, the given name and surname of the person to whom the initial authorisation

document was issued and the given name and surname of the patent agent to whom

authority is delegated shall be indicated in the authorisation document issued on the basis

of the right to delegate authority.

6.8. If an applicant whose residence or seat is located outside the Republic of Estonia

files a registration application without using the services of a patent agent, the applicant

shall authorise a patent agent to perform procedures related to the processing of the

registration application. An authorisation document shall be submitted during the term

provided for in the Act.

6.9. A request for the registration of an industrial design in which information required in

clause 26 (2) 2) or 26 (2) 3) of the Act is entered in data field 3 and which is signed by

the applicant shall be considered by the Patent Office as a document certifying

authorisation and substituting for an authorisation document. In such case, the

performance of all procedures related to the processing of a registration application and

the continued validity of the registration of an industrial design is deemed to be the extent

of authorisation of the patent agent and the place and time of signing the request is

deemed to be the place and time of issue of the authorisation document.

6.10. If a registration application is submitted via a representative and the request for the

registration of an industrial design is signed by the representative, an authorisation

document shall be submitted during the term provided for in the Act.

6.11. If several authorisation documents for the performance of the same procedure are

issued to different persons, the Patent Office shall correspond with the person indicated in

the more recent authorisation document.

7. Documents certifying priority claim

7.1. Upon filing a priority claim pursuant to the Paris Convention for the Protection of

Industrial Property, a document from the administrative agency which received the first

registration application certifying the filing date of the registration application and a copy

of the first registration application the authenticity of which is certified by the

administrative agency which received the first registration application shall be included

in the documents of a registration application.

7.2. If priority is claimed on the basis of several earlier applications for the registration of

an industrial design, documents certifying priority shall be included concerning all such

applications.

8. Language requirements

8.1. The language of the documents of a registration application and of translations

thereof shall be in compliance with the Estonian Literary Standard.

8.2. A translation shall correspond to the original document.

8.3. Upon the filing and processing of a registration application, the Patent Office shall

consider translations to be authentic registration application documents.

8.4. If documents certifying a priority claim submitted by applicants or their

representatives to the Patent Office are not in Estonian, the Patent Office may require

translation of the documents in the course of the processing of the application.

9. Requirements for completion of registration application documents

9.1. Requirements for completion of representation

9.1.1. A representation shall be submitted on an even neutral background.

9.1.2. A representation shall be of good quality, with clear contours and suitable for

making reductions or enlargements.

9.1.3. The drawing(s) shall be made with thick black lines using drawing instruments on

strong white and smooth paper in format A4 (210 x 297 mm). The minimum margins of a

sheet of paper shall be:

top margin – 25 mm;

left margin – 25 mm;

right margin – 15 mm;

bottom margin – 10 mm.

9.1.4. The drawing(s) shall be presented without titles, descriptive texts or a scale.

9.1.5. If images on two or more sheets are parts of one drawing, the images shall be

placed in such a way that it is possible to form the whole drawing by putting the sheets

together.

9.1.6. It is recommended that the drawings be placed on a sheet in portrait format so that

the sheet would be filled to the maximum. If drawings cannot be placed on a sheet in

portrait format, they shall be placed so that the upper part is on the left side of the sheet

(as seen in the case of portrait format).

9.1.7. More than one image may be placed on one sheet of the drawings but the images

must be clearly separated from each other. All images shall be numbered with arabic

numerals, for example fig 1 (always the perspective view), fig 2, fig 3, etc. If only one

image is used to explain an industrial design, the image need not be numbered.

9.1.8. The pages of drawings shall be numbered with arabic numerals which are placed in

the centre of the page under the top margin and which measure at least 3.2 mm. The

number of each page shall consist of two arabic numerals which are separated by a slash

and of which the first numeral is the number of the page and the second numeral is the

total number of pages of the representation (for example 1/3, where number 1 indicates

the sequence number of the page of the drawing and number 3 the total number of pages

of the drawing).

9.1.9. The drawings shall not be folded, rolled up or attached to other documents.

9.1.10. Photographs shall be of good quality, with clear contours; only the protected

industrial design may be depicted on a photograph, it shall contain no other objects.

Slides or negatives shall not be submitted.

9.1.11. A photograph shall not be larger in size than format A4 (210 x 297 mm).

9.1.12. The number of the image, the name of the industrial design and the given name

and surname or the name of the applicant shall be indicated on the back side of the

photograph.

9.1.13. Designs of two­dimensional textile products (fabrics, tablecloths, serviettes,

towels, bed linen, scarves, shawls, etc. ) shall be depicted on a representation as two­

dimensional so as to give a clear and precise depiction of the design submitted, for

example of the texture or pattern of a fabric. If the pattern of a material is repeated, the

entire repeated part of the pattern shall be depicted on a representation.

9.1.14. In the case of a set of industrial designs, the entire set shall be depicted on each

photograph or drawing.

9.1.15. In the case of protection of variants of an industrial design, a separate set of

photographs or drawings shall be submitted for each variant of the design.

9.1.16. It is recommended to show such parts of a product which are of interest but which

are not presented sufficiently clearly on a representation separately as enlargements.

9.2. General requirements for completion of text documents (if description of industrial

design is submitted)

9.2.1. Text documents of a registration application shall be completed and submitted on

strong white paper in format A4 (210 x 297 mm).

9.2.2. Each sheet of paper shall be used in portrait format and on one side only.

9.2.3. The margins of a page of text documents shall be the following: �

top margin – 20­40 mm; �

left margin – 25­40 mm; �

right margin – 20­30 mm; �

bottom margin – 20­30 mm. �

9.2.4. The pages of text documents shall be numbered with arabic numerals. The number

of a page shall be placed in the centre of the page under the top margin. The number of

the page shall not be indicated on the first page.

9.2.5. The text of the documents shall be in typewritten form.

9.2.6. Documents must be typed with black non­erasable permanent ink and with such

contrast which allows making of the necessary number of copies of the documents using

modern copying devices.

9.2.7. The text shall be typed with minimum line spacing of 1.5 and using a font in which

the height of capital letters is at least 2.1 mm.

9.3. Terminology and symbols

9.3.1. Terms, symbols, abbreviations and measurement units ordinarily used in scientific

and technical literature shall be used in descriptions of industrial designs.

9.3.2. If a term or sign is used which is not common in professional publications, the

meaning of the term or sign shall be explained when the term or sign is first used in the

description of the industrial design.

9.3.3. All conventional signs shall be explained.

9.3.4. Descriptions of industrial designs shall be in compliance with the requirement of

uniform terminology.

9.4. Non­permissible expressions

9.4.1. The text of registration application documents shall not contain expressions which

are contrary to good practice or derogatory to other persons and their industrial designs.

9.4.2. Texts or images advertising an industrial design or the applicant shall not be

included in the description of the industrial design or other registration application

documents.

Part II

Filing of Applications for Registration of Industrial Designs

10. Filing of registration applications

A registration application is filed by an applicant or the representative of an applicant

with the receiving section of the Patent Office in person or by post. Registration

applications filed by telefax or electronic means are not accepted.

11. Filing of document certifying payment of state fee

11.1. A document certifying payment of the state fee shall be filed either on the filing

date of the registration application or within one month after the filing date of the

registration application.

11.2. If the document certifying payment of the state fee is not filed with the Patent

Office on time, the Patent Office shall refuse to process the registration application.

12. Submission of authorisation document

12.1. An authorisation document shall be submitted on the filing date of the registration

application or within two months after the filing date of the registration application.

12.2. If the authorisation document is not filed with the Patent Office on time, the Patent

Office shall refuse to process the registration application.

13. Submission of documents certifying priority claim

13.1. A priority claim shall be submitted on the filing date of the registration application.

13.2. Documents certifying a priority claim shall be filed either on the filing date of the

registration application or within nine months after the date of priority.

13.3. If priority is claimed in a registration application but the applicant does not file the

documents certifying the priority claim with the registration application or within nine

months after the date of priority, or if the documents filed are not in compliance with the

requirements provided for in subsections 11 (2)­(4) and § 23 of the Act, the Patent Office

shall refuse to satisfy the priority claim.

14. Registration application with deficiencies

If the registration application filed by an applicant contains deficiencies, the Patent Office

shall notify the applicant thereof in writing and set a term for the elimination of

deficiencies or provision of explanations pursuant to the procedure provided for in

subsections 31 (5) and (6) of the Act.

STATE PATENT OFFICE Request for registration of industrial

design

Utility Models Department

To be submitted in three original copies

Toompuiestee 7

EE0100 Tallinn

Phone (2) 631 1734

(2) 631 4103

Fax (2) 645 1342

To be completed by the Patent Office

21. Application number (11)

22. Filing date of application

30. Priority: date country document number

(15) Date of registration of industrial design

51. Class(es)

To be completed by applicant

1. Name of industrial design Class

(54)

2. Applicant(s) (given name and surname, or name, address, phone number, fax,

country code)

(71)

3. Representative of applicant(s)

(74)□ Joint representative (given name and surname, or name)

□ Patent agent (given name and surname, address, phone number and/or fax, registration number)

4. Correspondence data (person’s given name and surname, title, postal address,

phone number and/or fax)

5. Author(s) (given name and surname, address, country code)

(72)

6. Prohibition to disclose information concerning author(s)

7. Applicant acquired the right to apply for registration of industrial design as

□ author □ legal successor of author □ employer □ other person pursuant to contract

8. Priority claim

□ on the basis of application pursuant to Paris Convention or other agreement

(32) date (33) country (31) application number

9. Request for suspension of processing if applicant wishes to postpone entry of

industrial design in the register by a term of … (maximum 12) months.

10. State fee …..kroons

Method of payment Payment document no. Date

11: Annexes

□ Representation

□ drawing(s)

black­and­white ….. drawing(s) on ….. page(s) in three original copies

in colour ….. drawing(s) on ….. page(s) in three original copies

□ photograph(s)

black­and­white ….. photograph(s) on ….. page(s) in three original copies

in colour ….. photograph(s) on ….. page(s) in three original copies

□ Document certifying payment of state fee on ….. page(s) in a single copy

□ Authorisation document on ….. page(s) in a single copy

□ Documents certifying priority claim on ….. page(s) in a single copy

□ Description of industrial design (optional) on ….. page(s) in a single copy

Signature(s)

Place

Date

RTL = Riigi Teatja Lisa = Appendix to the State Gazette1

2 RT = Riigi Teataja = State Gazette


Законодательство Заменено следующим актом (1 текст(ов)) Заменено следующим актом (1 текст(ов))
Договоры Касается (2 док.) Касается (2 док.)
Данные недоступны.

№ в WIPO Lex EE104