B | PERFORMING OPERATIONS; TRANSPORTING | |||||||||||||||||||||||||||||||||||
SHAPING | ||||||||||||||||||||||||||||||||||||
B21 | MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVING MATERIAL; PUNCHING METAL | |||||||||||||||||||||||||||||||||||
Note(s) [2015.01]
| ||||||||||||||||||||||||||||||||||||
B21C | MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES, PROFILES OR LIKE SEMI-MANUFACTURED PRODUCTS OTHERWISE THAN BY ROLLING; AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKING WITHOUT ESSENTIALLY REMOVING MATERIAL | |||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
Metal drawing | ||||||||||||||||||||||||||||||||||||
B21C 1/00 | Manufacture of metal sheets, wire, rods, tubes or like semi-manufactured products by drawing [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 1/02 | • | |||||||||||||||||||||||||||||||||||
B21C 1/04 | • • with two or more dies operating in series [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 1/06 | • • • | |||||||||||||||||||||||||||||||||||
B21C 1/08 | • • • | |||||||||||||||||||||||||||||||||||
B21C 1/10 | • • • • | |||||||||||||||||||||||||||||||||||
B21C 1/12 | • • | |||||||||||||||||||||||||||||||||||
B21C 1/14 | • • | |||||||||||||||||||||||||||||||||||
B21C 1/16 | • | |||||||||||||||||||||||||||||||||||
B21C 1/18 | • • | |||||||||||||||||||||||||||||||||||
B21C 1/20 | • • | |||||||||||||||||||||||||||||||||||
B21C 1/22 | • • | |||||||||||||||||||||||||||||||||||
B21C 1/24 | • • • | |||||||||||||||||||||||||||||||||||
B21C 1/26 | • • • • Push-bench drawing [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 1/27 | • • Carriages; Drives [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 1/28 | • • • | |||||||||||||||||||||||||||||||||||
B21C 1/30 | • • • Drives, e.g. carriage-traversing mechanisms; Driving elements, e.g. drawing chains; Controlling the drive [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 1/32 | • • | |||||||||||||||||||||||||||||||||||
B21C 1/34 | • • | |||||||||||||||||||||||||||||||||||
B21C 3/00 | Profiling tools for metal drawing; Combinations of dies and mandrels for metal drawing [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 3/02 | • | |||||||||||||||||||||||||||||||||||
B21C 3/04 | • • | |||||||||||||||||||||||||||||||||||
B21C 3/06 | • • | |||||||||||||||||||||||||||||||||||
B21C 3/08 | • • with section defined by rollers, balls, or the like [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 3/10 | • • with hydraulic forces acting immediately on work [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 3/12 | • • Die holders; Rotating dies [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 3/14 | • • • | |||||||||||||||||||||||||||||||||||
B21C 3/16 | • Mandrels (separating mandrels from work B21C 45/00); Mounting or adjusting same [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 3/18 | • Making tools by operations not covered by a single other subclass; Repairing [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 5/00 | ||||||||||||||||||||||||||||||||||||
B21C 9/00 | ||||||||||||||||||||||||||||||||||||
B21C 9/02 | • Selection of compositions therefor [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 19/00 | ||||||||||||||||||||||||||||||||||||
Metal extruding | ||||||||||||||||||||||||||||||||||||
B21C 23/00 | Extruding metal; Impact extrusion [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/01 | • starting from material of particular form or shape, e.g. mechanically pre-treated (B21C 23/22 takes precedence; heat treatment or combinations thereof with mechanical treatments, see appropriate classes) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/02 | • Making uncoated products [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/03 | • • by both direct and backward extrusion [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/04 | • • by direct extrusion [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/06 | • • • Making sheets [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/08 | • • • Making wire, rods or tubes [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/10 | • • • • Making finned tubes [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/12 | • • • • Extruding bent tubes or rods [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/14 | • • • Making other products [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/16 | • • • • Making turbo blades or propellers [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/18 | • • by impact extrusion [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/20 | • • by backward extrusion [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/21 | • Presses specially adapted for extruding metal (extrusion presses in general B30B 11/22) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/22 | • Making metal-coated products; Making products from two or more metals [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/24 | • • | |||||||||||||||||||||||||||||||||||
B21C 23/26 | • • • Applying metal coats to cables, e.g. to insulated electric cables [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/28 | • • • • on intermittently-operating extrusion presses [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/30 | • • • • on continuously-operating extrusion presses [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 23/32 | • Lubrication of metal being extruded or of dies, or the like, e.g. physical state of lubricant, location where lubricant is applied (chemical composition, see appropriate classes) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 25/00 | Profiling tools for metal extruding [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 25/02 | • Dies [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 25/04 | • Mandrels [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 25/06 | • Press heads, dies, or mandrels for coating work [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 25/08 | • Dies or mandrels with section variable during extruding, e. g for making tapered work; Controlling variation [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 25/10 | • Making tools by operations not covered by a single other subclass [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 26/00 | Rams or plungers for metal extruding; Discs therefor [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 27/00 | Containers for metal to be extruded (B21C 29/02 takes precedence) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 27/02 | • for making coated work [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 27/04 | • Venting metal-container chamber [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 29/00 | Cooling or heating extruded work or parts of the extrusion press [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 29/02 | • of containers for metal to be extruded [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 29/04 | • of press heads, dies, or mandrels [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 31/00 | Control devices for metal extruding, e.g. for regulating the pressing speed or temperature of metal (B21C 25/08 takes precedence); Measuring devices, e.g. for temperature of metal, combined with or specially adapted for use in connection with extrusion presses (measuring devices of more general interest within subclass B21C, see group B21C 51/00) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 33/00 | Feeding extrusion presses with metal to be extruded [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 33/02 | • the metal being in liquid form [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 35/00 | Removing work or waste from extruding presses; Drawing-off extruded work (in connection with the extruding of bent tubes or rods B21C 23/12); Cleaning dies, ducts, containers, or mandrels for metal extruding [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 35/02 | • Removing or drawing-off work [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 35/03 | • • | |||||||||||||||||||||||||||||||||||
B21C 35/04 | • Cutting-off or removing waste [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 35/06 | • Cleaning dies, ducts, containers or mandrels [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/00 | Manufacture of metal sheets, rods, wire, tubes, profiles or like semi-manufactured products, not otherwise provided for (by rolling B21B; by working or processing semi-finished sheet metal, profiles, tubes, or wire B21D, B21F; by casting B22; by material-removing machine tools B23; by welding, e.g. cladding or plating, B23K; by grinding or polishing B24; by electroforming C25D 1/00); Manufacture of tubes of special shape [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/02 | • of sheets [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/04 | • of rods or wire [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/06 | • of tubes or metal hoses; Combined procedures for making tubes, e.g. for making multi-wall tubes (bending sheets for making tubes B21D 5/00; seaming by folding B21D 39/02) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/08 | • • | |||||||||||||||||||||||||||||||||||
B21C 37/083 | • • • | |||||||||||||||||||||||||||||||||||
B21C 37/087 | • • • | |||||||||||||||||||||||||||||||||||
B21C 37/09 | • • • | |||||||||||||||||||||||||||||||||||
B21C 37/10 | • • Making tubes with riveted seams [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/12 | • • Making tubes or metal hoses with helically arranged seams [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/14 | • • | |||||||||||||||||||||||||||||||||||
B21C 37/15 | • • Making tubes of special shape; Making the fittings [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/16 | • • • Making tubes with varying diameter in longitudinal direction [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/18 | • • • • conical tubes [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/20 | • • • | |||||||||||||||||||||||||||||||||||
B21C 37/22 | • • • Making finned or ribbed tubes by fixing strip or like material to tubes (making heat exchangers B21D 53/02) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/24 | • • • • annularly-ribbed tubes [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/26 | • • • • helically-ribbed tubes [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/28 | • • • Making tube fittings for connecting pipes, e.g. U-pieces [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/29 | • • • • Making branched pieces, e.g. T-pieces [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 37/30 | • • Finishing tubes, e.g. sizing, burnishing [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 43/00 | ||||||||||||||||||||||||||||||||||||
B21C 43/02 | • | |||||||||||||||||||||||||||||||||||
B21C 43/04 | • • Devices for de-scaling wire or like flexible work [2006.01] | |||||||||||||||||||||||||||||||||||
Auxiliary operations used in connection with metal working without essentially removing material | ||||||||||||||||||||||||||||||||||||
B21C 45/00 | Separating mandrels from work or vice versa [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/00 | ||||||||||||||||||||||||||||||||||||
B21C 47/02 | • Winding-up or coiling [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/04 | • • on or in reels or drums, without using a moving guide (reels or drums B21C 47/28) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/06 | • • • | |||||||||||||||||||||||||||||||||||
B21C 47/08 | • • without making use of a reel or drum, the first turn being formed by a stationary guide [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/10 | • • by means of a moving guide [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/12 | • • • the guide moving parallel to the axis of the coil (B21C 47/14 takes precedence) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/14 | • • • | |||||||||||||||||||||||||||||||||||
B21C 47/16 | • Unwinding or uncoiling [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/18 | • • from reels or drums [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/20 | • • • | |||||||||||||||||||||||||||||||||||
B21C 47/22 | • • Unwinding coils without reels or drums [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/24 | • | |||||||||||||||||||||||||||||||||||
B21C 47/26 | • | |||||||||||||||||||||||||||||||||||
B21C 47/28 | • Drums or other coil-holders (gripping means B21C 47/32) [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/30 | • • expansible or contractible [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/32 | • Tongs or gripping means specially adapted for reeling operations [2006.01] | |||||||||||||||||||||||||||||||||||
B21C 47/34 | • | |||||||||||||||||||||||||||||||||||
B21C 49/00 | ||||||||||||||||||||||||||||||||||||
B21C 51/00 | ||||||||||||||||||||||||||||||||||||
B21C 99/00 | Subject matter not provided for in other groups of this subclass [2009.01] |