IPC 7 English version
B27L-B27L01108

SECTION B – PERFORMING OPERATIONS; TRANSPORTING


B 27WORKING OR PRESERVING WOOD OR SIMILAR MATERIAL; NAILING OR STAPLING MACHINES IN GENERAL


B 27 LREMOVING BARK OR VESTIGES OF BRANCHES (forestry A01G); SPLITTING WOOD; MANUFACTURE OF VENEER, WOODEN STICKS, WOOD SHAVINGS, WOOD FIBRES OR WOOD POWDER



1/

00Debarking or removing vestiges of branches from trees or logs (debarking by chemical treatment B27L 3/00); Machines therefor  [2]

Note

 Tree-feeding devices are covered by group B27B 25/00.  [5]

1/

02.by rubbing the trunks against each other (B27L 1/04 takes precedence); Equipment for wet practice  [5]

1/

04.by rubbing the trunks in rotating drums  [5]

1/

05..Drums therefor  [5]

1/

06.Manually-operated or portable devices for debarking or for removing vestiges of branches

1/

08.using rotating rings  [5]

1/

10.using rotatable tools (B27L 1/04, B27L 1/08, B27L 1/12 take precedence)  [5]

1/

12.using pliable tools  [5]

1/

14.using jets of fluid  [5]


3/

00Debarking by chemical treatment


5/

00Manufacture of veneer (working veneer or plywood B27D)

5/

02.Cutting strips from a rotating trunk or piece; Veneer lathes

5/

04..the trunk being rotated about an axis lying outside it

5/

06.Cutting strips from a stationarily-held trunk or piece by a rocking knife carrier, or from rocking trunk or piece by a stationarily-held knife carrier; Veneer-cutting machines

5/

08.Severing sheets or segments from veneer strips; Shearing devices therefor; Making veneer blanks, e.g. trimming to size


7/

00Arrangements for splitting wood  [6]

7/

02.using rotating members  [6]

7/

04..Conical screws  [6]

7/

06.using wedges, knives or spreaders (B27L 7/02 takes precedence)  [6]

7/

08.using chopping blocks  [6]


9/

00Manufacture of wooden sticks, e.g. toothpicks (of walking sticks, of sticks for umbrellas B27M 3/38; combined with other operations in the manufacture of matches C06F)


11/

00Manufacture of wood shavings, chips, powder, or the like (disintegrating in general B02C; edge trimming sawing blades or sawing tools combined with means to disintegrate waste B27B 33/20; obtaining fibres for spinning D01B 1/00; wet methods D21B 1/12); Tools therefor  [2]

11/

02.of wood shavings or the like

11/

04..of wood wool

11/

06.of wood powder or sawdust (grinding-stones B24D)

11/

08.of wood fibres, e.g. produced by tearing