IPC 6 English version B65D 35/00-B65D 43/26

IPC ⁶ English version

B65D 25/00 - B65D 33/38

B65D03500-B65D04326

B65D 45/00 - B65D 53/10

SECTION B– PERFORMING OPERATIONS; TRANSPORTING

B 65

CONVEYING; PACKING; STORING; HANDLING THIN OR FILAMENTARY MATERIAL

B 65 D

CONTAINERS FOR STORAGE OR TRANSPORT OF ARTICLES OR MATERIALS, e.g. BAGS, BARRELS, BOTTLES, BOXES, CANS, CARTONS, CRATES, DRUMS, JARS, TANKS, HOPPERS, FORWARDING CONTAINERS; ACCESSORIES, CLOSURES, OR FITTINGS THEREFOR; PACKAGING ELEMENTS; PACKAGES (containers specially adapted for storing agricultural or horticultural products A 01 F 25/14; containers specially adapted for use in dairies A 01 J; travelling bags or baskets, suitcases A 45 C; travelling or camp equipment A 45 F; household or table equipment A 47 G; letter-boxes for home use A 47 G 29/12; kitchen equipment A 47 J; associated with vehicles, see the appropriate subclass of B 60 to B 64; machines, apparatus, or devices for, or methods of, packaging articles or materials B 65 B; sack holders B 65 B 67/00; refuse receptacles B 65 F 1/00; handling sheets, webs or filamentary material B 65 H; load-engaging elements or devices attached to lifting or lowering gear of cranes or adapted for connection therewith for transmitting lifting forces B 66 C; liquid handling B 67; storing gases F 17; making containers, see subclasses dealing with the working of the material concerned)

35/

Pliable tubular containers adapted to be permanently deformed to expel contents, e.g. collapsible tubes for toothpaste or other plastic or semi-liquid material; Holders therefor

35/

Body construction

35/

made in one piece

35/

from metallic material

35/

from plastics material

35/

made by uniting or interconnecting two or more components

35/

Connections between body and closure-receiving bush

35/

with linings or inserts

35/

for minimising or preventing corrosion of body

35/

for keeping body in rolled state after partial expulsion of contents

35/

for retracting contents

35/

with two or more compartments

35/

with auxiliary devices (linings or inserts B 65 D 35/14)

35/

for filling

35/

for expelling contents

35/

Pistons

35/

Winding keys

35/

connected to, or associated with, tube holders

35/

for applying contents to surfaces (brushes combined or associated with tubular containers A 46 B 11/00)

35/

Nozzles

35/

for metering discharge

35/

for preventing loss of removable closure members

35/

Closures (closure members of interest apart from this application B 65 D 39/00 to B 65 D 55/00; forming bottom closures after filling B 65 B 7/14)

35/

with valves (bureau accessories for applying liquids, e.g. adhesive, B 43 M 11/00)

35/

Hand-operated valves

35/

opening when tubular containers is deformed

35/

Slits

35/

opening when closure is pressed against a surface to which contents are applied (nozzles B 65 D 35/38)

35/

Holders for collapsible tubes

37/

Portable flexible containers not otherwise provided for

Closure members for rigid or semi-rigid containers or for flexible containers presenting similar closing problems (closure flaps or lids attached to, or incorporated in, containers, or foldable or erectable container blanks, made of paper B 65 D 3/00, B 65 D 5/00; closure walls of containers specially constructed to be opened by cutting, piercing, or tearing of wall portions B 65 D 17/00; applying closure members to bottles, jars, or similar containers B 67 B; covers or similar closure members, for pressure vessels in general F 16 J 13/00); Parts of containers co-operating with closure members or characterised by the form of closure member (for large containers B 65 D 90/00) [3]

Note

In groups B 65 D 39/00 to B 65 D 55/00, it is desirable to add the indexing code of group B 65 D 101:00. The indexing code should be unlinked. [5]

39/

Closures arranged within necks or pouring openings or in discharge apertures, e.g. stoppers (lids or covers B 65 D 43/00; with additional securing elements B 65 D 45/00)

39/

Disc closures (discs with flanges B 65 D 39/04)

39/

Cup-shaped plugs or like hollow flanged members

39/

Balls

39/

Threaded or like closure members secured by rotation; Bushes therefor

39/

with bayonet cams

39/

expansible, e.g. inflatable

39/

extending through lateral openings in necks

39/

with handles or other special means facilitating manual actuation

39/

with anti-friction or wear-resistant coatings or coverings

41/

Caps, e.g. crown caps, crown seals, i.e. members having parts arranged for engagement with the external periphery of a neck or wall defining a pouring opening or discharge aperture; Protective cap-like covers for closure members, e.g. decorative covers of metal foil or paper (B 65 D 45/00 takes precedence; combinations of caps and protective cap-like covers B 65 D 51/18; making closures by working metal sheet B 21 D 51/44; affixing labels B 65 C 3/06)

41/

specially adapted for accommodating plural sizes [6]

41/

Caps or cap-like covers without lines of weakness, tearing strips, tags, or like opening or removal devices

41/

Threaded or like caps or cap-like covers secured by rotation

41/

with bayonet cams

41/

engaging a threaded ring clamped on the external periphery of the neck or wall

41/

Caps or cap-like covers adapted to be secured in position by permanent deformation of the wall-engaging parts

41/

made of relatively-stiff metallic materials, e.g. crown caps

41/

made of metallic foil or like thin flexible material

41/

Snap-on caps or cap-like covers

41/

push-on and twist-off [6]

41/

non-metallic, e.g. made of paper or plastics

41/

Caps or cap-like covers with membranes, e.g. arranged to be pierced

41/

Caps or cap-like covers with elastic parts adapted to be stretched over the container

41/

Caps or cap-like covers made of shrinkable material or formed in situ by dipping, e.g. using gelatine or celluloid

41/

Caps or cap-like covers serving as, or incorporating, drinking or measuring vessels

41/

Caps combined with stoppers

41/

Deformable caps combined with resilient stoppers to permit re-use as temporary closures

41/

Caps or cap-like covers with lines of weakness, tearing-strips, tags, or like opening or removal devices, e.g. to facilitate formation of pouring openings

41/

Threaded or like caps or cap-like covers

41/

with bayonet cams

41/

engaging a threaded ring clamped on the external periphery of the neck or wall

41/

Caps or cap-like covers adapted to be secured in position by permanent deformation of the wall-engaging parts

41/

made of relatively-stiff metallic material, e.g. crown caps

41/

made of metallic foil or like thin flexible material

41/

Snap-on caps or cap-like covers

41/

push-on and twist-off [6]

41/

non-metallic, e.g. made of paper, plastics

41/

Caps or cap-like covers with membranes, e.g. arranged to be pierced

41/

Caps or cap-like covers with elastic parts adapted to be stretched over the container

41/

Caps or cap-like covers made of shrinkable material or formed in situ by dipping, e.g. using gelatine, celluloid

41/

Caps or cap-like covers serving as, or incorporating, drinking or measuring vessels

41/

Caps or cap-like covers combined with stoppers

41/

Deformable caps combined with resilient stoppers to permit re-use as temporary closures

41/

Secondary protective cap-like outer covers for closure members (arrangements of closures with protective outer cap-like covers or of two or more co-operating closures B 65 D 51/18)

43/

Lids or covers for rigid or semi-rigid containers (for cooking vessels A 47 J 36/06; covers for pressure vessels in general F 16 J 13/00)

43/

Removable lids or covers (with means for piercing, cutting, or tearing a frangible inner closure B 65 D 51/22)

43/

nestable or stackable (nestable or stackable containers B 65 D 21/00) [3]

43/

having a part, or parts, engaging within the mouth of the container and retained by friction or gravity

43/

having a peripheral channel embracing the rim of the container

43/

having a peripheral flange fitting over the rim of the container

43/

and retained by snapping over beads or projections

43/

guided for removal by sliding

43/

Non-removable lids or covers

43/

hinged for upward or downward movement (hinges of door or similar type E 05 D)

43/

pivoted for movement in plane of container mouth

43/

linearly slidable

43/

Devices for holding in closed position, e.g. clips [4]

43/

Devices for retaining in open position

43/

Mechanisms for opening or closing, e.g. pedal- operated

B65D 25/00 - B65D 33/38

B65D 45/00 - B65D 53/10