IPC 6 English version B21C-B21C 51/00

B21C-B21C05100

SECTION B– PERFORMING OPERATIONS; TRANSPORTING

B 21

MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVING MATERIAL; PUNCHING METAL (casting, powder metallurgy B 22; shearing B 23 D; working of metal by the action of a high concentration of electric current B 23 H; soldering, welding, flame-cutting B 23 K; other working of metal B 23 P; punching sheet material in general B 26 F; processes for changing of physical properties of metals C 21 D, C 22 F; electroforming C 25 D 1/00)

B 21 C

MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES, OTHERWISE THAN BY ROLLING; AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKING WITHOUT ESSENTIALLY REMOVING MATERIAL

Metal drawing (continuous casting B 22 D 11/00; pressure welding by means of a rolling mill B 23 K 20/04)

Manufacture of metal sheets, metal wire, metal rods, metal tubes by drawing

Drawing metal wire or like flexible metallic material by drawing machines or apparatus in which the drawing action is effected by drums

with two or more dies operating in series

in which the material slips on the drums

in which the material does not slip on the drums

with accumulation of material between consecutively-arranged dies

Regulating or controlling speed of drawing drums, e.g. to influence tension; Drives; Stop or relief mechanisms (couplings for drums B 21 C 1/14; design or construction of electrical equipment, see the relevant classes)

Drums, e.g. capstans (capstans or winches in general B 66 D); Connection of grippers thereto; Grippers specially adapted for drawing machines or apparatus of the drum type; Couplings specially adapted for these drums

Metal drawing by machines or apparatus in which the drawing action is effected by other means than drums, e.g. by a longitudinally-moved carriage pulling or pushing the work or stock for making metal sheets, bars, or tubes

from stock of limited length (B 21 C 1/22 takes precedence)

from stock of essentially unlimited length (B 21 C 1/22 takes precedence)

specially adapted for making tubular articles (bending sheet metal into tubular form by drawing B 21 D 5/10)

by means of mandrels (mandrels B 21 C 3/16)

Push-bench drawing

Carriages; Drives

Carriages; Connections of grippers thereto; Grippers (for drawing machines of the drum type B 21 C 1/14)

Drives, e.g. carriage-traversing mechanisms; Driving elements, e.g. drawing chains; Controlling the drive

Feeding or discharging the material or mandrels

Guiding or supporting the material or mandrels

Profiling tools for metal drawing; Combinations of dies and mandrels

Dies; Selection of material therefor; Cleaning thereof

with non-adjustable section (B 21 C 3/08 takes precedence)

with adjustable section (B 21 C 3/08 takes precedence)

with section defined by rollers, balls, or the like

with hydraulic forces acting immediately on work

Die holders; Rotating dies

Die holders combined with devices for guiding the drawing material or combined with devices for cooling, heating, or lubricating

Mandrels (separating mandrels from work B 21 C 45/00); Mounting or adjusting same

Making tools by operations not covered by a single other subclass; Repairing

Pointing; Push-pointing

Cooling, heating or lubricating drawing material (B 21 C 3/14 takes precedence)

Selection of compositions therefor

19/

Devices for straightening wire or like work combined with or specially adapted for use in connection with drawing or winding machines or apparatus

Metal extruding (continuous casting B 22 D 11/00)

23/

Extruding metal; Impact extrusion

23/

starting from material of particular form or shape, e.g. mechanically pre-treated (B 21 C 23/22 takes precedence; heat treatment or combinations thereof with mechanical treatments, see appropriate classes)

23/

Making uncoated products

23/

by both direct and backward extrusion

23/

by direct extrusion

23/

Making sheets

23/

Making wire, bars, tubes

23/

Making finned tubes

23/

Extruding bent tubes or rods

23/

Making other products

23/

Making turbo blades or propellers

23/

by impact extrusion [2]

23/

by backward extrusion

23/

Presses specially adapted for extruding metal (extrusion presses in general B 30 B 11/22)

23/

Making metal-coated products; Making products from two or more metals

23/

Covering indefinite lengths of metal or non-metal material with a metal coating

23/

Applying metal coats to cables, e.g. to insulated electric cables

23/

on intermittently-operating extrusion presses

23/

on continuously-operating extrusion presses

23/

Lubrication of metal being extruded or of dies, or the like, e.g. physical state of lubricant, location where lubricant is applied (chemical composition, see appropriate classes)

25/

Profiling tools for metal extruding

25/

Dies

25/

Mandrels

25/

Press heads, dies, or mandrels for coating work

25/

Dies or mandrels with section variable during extruding, e. g for making tapered work; Controlling variation

25/

Making tools by operations not covered by a single other subclass

26/

Rams or plungers; Discs therefor [2]

27/

Containers for metal to be extruded (B 21 C 29/02 takes precedence)

27/

for making coated work

27/

Venting metal-container chamber

29/

Cooling or heating work or parts of the extrusion press

29/

of containers for metal to be extruded

29/

of press heads, dies, or mandrels

31/

Control devices, e.g. for regulating the pressing speed or temperature of metal (B 21 C 25/08 takes precedence); Measuring devices, e.g. for temperature of metal, combined with or specially adapted for use in connection with extrusion presses (measuring devices of more general interest within subclass B 21 C, see group B 21 C 51/00)

33/

Feeding extrusion presses with metal to be extruded

33/

the metal being in liquid form

35/

Removing work or waste from extruding presses; Drawing-off extruded work (in connection with the extruding of bent tubes or rods B 21 C 23/12); Cleaning dies, ducts, containers, or mandrels [2]

35/

Removing or drawing-off work

35/

Straightening the work (metal straightening in general B 21 D)

35/

Cutting-off or removing waste

35/

Cleaning dies, ducts, containers or mandrels [2]

37/

Manufacture of metal sheets, bars, wire, tubes or like semi-manufactured products, not otherwise provided for (by rolling B 21 B; by working or processing semi-finished sheet metal, profiles, tubes, or wire B 21 D, B 21 F; by casting B 22; by material-removing machine tools B 23; by welding, e.g. cladding or plating, B 23 K; by grinding or polishing B 24; by electroforming C 25 D 1/00; by drawing or extruding, see the relevant groups); Manufacture of tubes of special shape [2]

37/

of sheets

37/

of bars or wire

37/

of tubes or metal hoses; Combined procedures for making tubes, e.g. for making multi-wall tubes (bending sheets for making tubes B 21 D 5/00; seaming by folding B 21 D 39/02)

37/

Making tubes with welded or soldered seams (involving only a soldering or welding operation B 23 K)

37/

083

Supply, or operations combined with supply, of strip material

37/

087

using rods or strips of soldering material

37/

of coated strip material

37/

Making tubes with riveted seams

37/

Making tubes or metal hoses with helically arranged seams

37/

Making tubes from doubled flat material

37/

Making tubes of special shape; Making the fittings

37/

Making tubes with varying diameter in longitudinal direction

37/

conical tubes

37/

Making helical or similar guides in or on tubes without removing material, e.g. by drawing same over mandrels, by pushing same through dies

37/

Making finned or ribbed tubes by fixing strip or like material to tubes (making heat exchangers B 21 D 53/02)

37/

annularly-ribbed tubes

37/

helically-ribbed tubes

37/

Making tube fittings for connecting pipes, e.g. U-pieces

37/

Making branched pieces, e.g. T-pieces

37/

Finishing tubes, e.g. sizing, burnishing

43/

Devices for cleaning metal products combined with or specially adapted for use with machines or apparatus provided for in this subclass

43/

combined with or specially adapted for use in connection with drawing or winding machines or apparatus

43/

Devices for de-scaling wire or like flexible work

Auxiliary operations used in connection with metal working without essentially removing material

45/

Separating mandrels from work or vice versa

47/

Winding-up, coiling or winding-off metal wire, metal band or other flexible metal material characterised by features relevant to metal processing only (coiling wire into particular forms B 21 F 3/00; hot coilers in connection with heat-treatment apparatus C 21 D 9/68)

47/

Winding-up or coiling

47/

on or in reels or drums, without using a moving guide (reels or drums B 21 C 47/28)

47/

with loaded rollers, bolts, or equivalent means holding the material on the reel or drum

47/

without making use of a reel or drum, the first turn being formed by a stationary guide

47/

by means of a moving guide

47/

the guide moving parallel to the axis of the coil (B 21 C 47/14 takes precedence)

47/

by means of a rotating guide, e.g. laying the material around a stationary reel or drum

47/

Unwinding or uncoiling

47/

from reels or drums

47/

the unreeled material moving transversely to the tangent line of the drum, e.g. axially, radially

47/

Unwinding coils without reels or drums

47/

Transferring coils to or from winding apparatus or to or from operative position therein; Preventing uncoiling during transfer

47/

Special arrangements with regard to simultaneous or subsequent treatment of the material

47/

Drums or other coil-holders (gripping means B 21 C 47/32)

47/

expansible or contractible

47/

Tongs or gripping means specially adapted for reeling operations

47/

Feeding or guiding devices not specially adapted to a particular type of apparatus

49/

Devices for temporarily accumulating material

51/

Measuring, gauging, indicating, counting, or marking devices specially adapted for use in the production or manipulation of material in accordance with subclasses B 21 B to B 21 F