(0)H02G:1/1:
IPC6
SECTION H - ELECTRICITY
INSTALLATION OF ELECTRIC CABLES OR LINES, OR OF COMBINED...
H02G
2/2
<<   >>   H02G005/00 - H02G015/32  

5
/ 00 Installations of bus-bars

5
/ 02 • Open installations  

5
/ 04 • Partially-enclosed installations, e.g. in ducts and adapted for sliding or rolling current collection (non-rotary current collectors H 01 R 41/00)  

5
/ 06 • Totally-enclosed installations, e.g. in metal casings  

5
/ 08 • • Connection boxes therefor  

5
/ 10 • Cooling [2]  
 

 7
/ 00 Overhead installations of electric lines or cables (installations of bus-bars H 02 G 5/00; trolley wires or contact lines for electric railways B 60 M; fastening conductors to insulators H 01 B 17/00, e.g. H 01 B 17/06, H 01 B 17/16, H 01 B 17/22; protection against abnormal electric conditions H 01 H; hook contacts for temporary connections to overhead lines H 01 R 11/14)

7
/ 02 • Devices for adjusting or maintaining mechanical tension, e.g. take-up device  

7
/ 04 • Arrangements or devices for relieving mechanical tension  

7
/ 05 • Suspension arrangements or devices for electric cables or lines [3]  

7
/ 06 • • Suspensions for lines or cables along a separate supporting wire, e.g. S-hook [3]  

7
/ 08 • • • Members clamped to the supporting wire or to the line or cable [3]  

7
/ 10 • • • Flexible members or lashings wrapped around both the supporting wire and the line or cable [3]  

7
/ 12 • Devices for maintaining distance between parallel conductors, e.g. spacer  

7
/ 14 • Arrangements or devices for damping mechanical oscillations of lines, e.g. for reducing production of sound  

7
/ 16 • Devices for removing snow or ice from lines or cables (from insulators H 01 B 17/52)  

7
/ 18 • Devices affording mechanical protection in the event of breakage of a line or cable, e.g. net for catching broken lines  

7
/ 20 • Spatial arrangements or dispositions of lines or cables on poles, posts, or towers (construction of poles, posts, or towers E 04 H 12/22)  

7
/ 22 • Arrangements of earthing wires suspended between mastheads  
 

 9
/ 00 Installations of electric cables or lines in or on the ground or water (cathodic protection C 23 F 13/02 ; detection of buried cables G 01 V)

9
/ 02 • laid directly in or on the ground, river-bed or sea-bottom; Coverings therefor, e.g. tile  

9
/ 04 • in surface ducts; Ducts or covers therefor  

9
/ 06 • in underground tubes or conduits; Tubes or conduits therefor  

9
/ 08 • in tunnels  

9
/ 10 • in cable chambers, e.g. in manhole, in handhole (building aspects of cable chambers section E, e.g. E 04 H 5/06)  

9
/ 12 • supported on or from floats, e.g. in water (floating cables H 01 B 7/12)  
 

 11
/ 00 Arrangements of electric cables or lines between relatively-movable parts (current collectors H 01 R)

11
/ 02 • using take-up reel or drum  
 

 13
/ 00 Installations of lightning conductors; Fastening thereof to supporting structure (indicating, counting or recording lightning strokes G 01; lightning arrestors H 01 C 7/12, H 01 C 8/04, H 01 G 9/18, H 01 T; earth plates, pins or other contacts H 01 R)
 

 15
/ 00 Cable fittings

15
/ 007 • Devices for relieving mechanical stress [3]  

15
/ 013 • Sealing means for cable inlets (inlets for cables filled with, or surrounded by, gas or oil H 02 G 15/32) [3]  

15
/ 02 • Cable terminations (for gas- or oil-filled cables H 02 G 15/22)  

15
/ 04 • • Cable-end sealings  

15
/ 06 • • Cable terminating boxes, frames, or other structures (terminal blocks H 01 R 9/00)  

15
/ 064 • • • with devices for relieving electrical stress [3]  

15
/ 068 • • • • connected to the cable shield only (H 02 G 15/072 takes precedence) [3]  

15
/ 072 • • • • of the condenser type [3]  

15
/ 076 • • • for multi-conductor cables [3]  

15
/ 08 • Cable junctions (for gas or oil filled cables H 02 G 15/24; disconnectible junctions, electrical connections H 01 R)  

15
/ 10 • • protected by boxes, e.g. by distribution, connection or junction boxes (terminal blocks H 01 R 9/00 )  

15
/ 103 • • • with devices for relieving electrical stress [3]  

15
/ 105 • • • • connected to the cable shield only (H 02 G 15/107 takes precedence) [3]  

15
/ 107 • • • • of the condenser type [3]  

15
/ 113 • • • Boxes split longitudinally in main cable direction [3]  

15
/ 115 • • • Boxes split perpendicularly to main cable direction [3]  

15
/ 117 • • • for multiconductor cables [3]  

15
/ 12 • • • for incorporating transformers, loading coils or amplifiers  

15
/ 14 • • • • specially adapted for submarine cables  

15
/ 16 • • • structurally associated with support for line-connecting terminals within the box  

15
/ 18 • • protected by sleeves, e.g. for communication cable (two-part covers H 02 G 15/10)  

15
/ 184 • • • with devices for relieving electrical stress [3]  

15
/ 188 • • • • connected to cable shield only [3]  

15
/ 192 • • • with support means for ends of the sleeves [3]  

15
/ 196 • • • having lapped insulation [3]  

15
/ 20 • Cable fittings for cables filled with or surrounded by gas or oil (H 02 G 15/34 takes precedence) [3]  

15
/ 22 • • Cable terminations  

15
/ 23 • • • Cable-end sealings [3]  

15
/ 24 • • Cable junctions  

15
/ 25 • • • Stop junctions [3]  

15
/ 26 • • Expansion vessels; Locking heads; Auxiliary pipe-lines  

15
/ 28 • • structurally associated with devices for indicating the presence or location of non-electric faults (combined with electric protective means H 02 H)  

15
/ 30 • • with devices for relieving electrical stress [3]  

15
/ 32 • • Cable inlets [3]  

15
/ 34 • Cable fittings for cryogenic cables [3]  

 

 

 
<< >>
1 2 2