(0)G01N:5/9:
IPC6
SECTION G - PHYSICS
INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR...
G01N
6/10
<<   >>   G01N025/00 - G01N025/72  

25
/ 00 Investigating or analysing materials by the use of thermal means (G 01 N 3/00 to G 01 N 23/00 take precedence)

25
/ 02 by investigating changes of state or changes of phase; by investigating sintering  

25
/ 04 of melting point; of freezing point; of softening point  

25
/ 06 Analysis by measuring change of freezing point  

25
/ 08 of boiling point  

25
/ 10 Analysis by measuring change of boiling point  

25
/ 12 of critical point; of other phase change  

25
/ 14 by using distillation, extraction, sublimation, condensation, freezing, or crystallisation (G 01 N 25/02 takes precedence)  

25
/ 16 by investigating thermal coefficient of expansion  

25
/ 18 by investigating thermal conductivity (by calorimetry G 01 N 25/20; by measuring change of resistance of an electrically-heated body G 01 N 27/18)  

25
/ 20 by investigating the development of heat, i.e. calorimetry, e.g. by measuring specific heat, by measuring thermal conductivity  

25
/ 22 on combustion or catalytic oxidation, e.g. of components of gas mixtures  

25
/ 24 using combustion tubes, e.g. for micro-analysis  

25
/ 26 using combustion with oxygen under pressure, e.g. in bomb calorimeter  

25
/ 28 the rise in temperature of the gases resulting from combustion being measured directly  

25
/ 30 using electric temperature-responsive elements  

25
/ 32 using thermoelectric elements  

25
/ 34 using mechanical temperature-responsive elements, e.g. bimetallic  

25
/ 36 for investigating the composition of gas mixtures  

25
/ 38 using the melting or combustion of a solid  

25
/ 40 the heat developed being transferred to a flowing fluid  

25
/ 42 continuously  

25
/ 44 the heat developed being transferred to a fixed quantity of fluid  

25
/ 46 for investigating the composition of gas mixtures  

25
/ 48 on solution, sorption, or a chemical reaction not involving combustion or catalytic oxidation  

25
/ 50 by investigating flash-point; by investigating explosibility  

25
/ 52 by determining flash-point of liquids  

25
/ 54 by determining explosibility  

25
/ 56 by investigating moisture content  

25
/ 58 by measuring changes of properties of the material due to heat, cold, or expansion  

25
/ 60 for determining the wetness of steam  

25
/ 62 by psychrometric means, e.g. wet-and-dry-bulb thermometers  

25
/ 64 using electric temperature-responsive elements  

25
/ 66 by investigating dew-point  

25
/ 68 by varying the temperature of a condensing surface  

25
/ 70 by varying the temperature of the material, e.g. by compression, by expansion  

25
/ 72 Investigating presence of flaws (by investigating thermal conductivity G 01 N 25/18)  

<< >>
1 6 10