(0)E06B:2/3:
IPC6
SECTION E - FIXED CONSTRUCTIONS
FIXED OR MOVABLE CLOSURES FOR OPENINGS IN BUILDINGS,...
E06B
3/4
<<   >>   E06B005/00 - E06B007/34  

5
/ 00 Doors, windows, or like closures for special purposes; Border constructions therefor

5
/ 01 Trap-doors  

5
/ 02 for out-buildings or cellars; Other simple closures not designed to be close-fitting  

5
/ 04 with fixed wooden frames  

5
/ 06 with fixed metal frames  

5
/ 08 with fixed frames made of concrete, stone-like material, or plastics  

5
/ 10 for protection against air-raid or other war-like action; for other protective purposes  

5
/ 11 against burglary [6]  

5
/ 12 against air pressure, explosion, or gas  

5
/ 14 Gasproof doors or similar closures; Adaptation of fixed constructions therefor  

5
/ 16 Fireproof doors or similar closures; Adaptations of fixed constructions therefor  

5
/ 18 against harmful radiation (against heat E 06 B 5/16)  

5
/ 20 for insulation against noise  
 

7
/ 00 Special arrangements or measures in connection with doors or windows (screening or similar protective devices E 06 B 9/00)

7
/ 02 for providing ventilation, e.g. through double windows; Arrangement of ventilation roses (airflow control members per se F 24 F 13/08)  

7
/ 03 Ventilating devices for inserting under upwardly-sliding windows (rain or draught deflectors E 06 B 7/26)  

7
/ 04 with ventilation wings (E 06 B 7/08 takes precedence)  

7
/ 06 with one ventilation wing only  

7
/ 08 Louvre doors, windows, or grilles  

7
/ 082 with rigid or slidable lamellae  

7
/ 084 with rotatable lamellae  

7
/ 086 interconnected for concurrent movement [2]  

7
/ 088 with facing protective grille or safety guard [2]  

7
/ 09 mounted in movable wing, e.g. door [2]  

7
/ 092 operable in two or more distinct sets [2]  

7
/ 094 operable in sequence; characterised by additional independent movement [2]  

7
/ 096 operated or interconnected by gearing (wing operators with gearing in general E 05 F 11/00) [2]  

7
/ 098 with weather seal [2]  

7
/ 10 by special construction of the frame members  

7
/ 12 Measures preventing the formation of condensed water (double glazing E 06 B 3/24 to E 06 B 3/28, E 06 B 3/64, E 06 B 3/66; heating arrangements specially adapted for transparent or reflecting areas H 05 B 3/84)  

7
/ 14 Measures for draining-off condensed water or water leaking-in  

7
/ 16 Sealing arrangements on wings or parts co-operating with the wings (E 06 B 7/098 takes precedence) [2]  

7
/ 18 by means of movable edgings, e.g. draught sealings additionally used for bolting  

7
/ 20 automatically withdrawn when the wing is opened  

7
/ 205 with sealing strip mounted on sill [2]  

7
/ 21 with sealing strip movable in plane of wing [2]  

7
/ 215 with sealing strip being moved to a retracted position by elastic means, e.g. springs [2]  

7
/ 22 by means of elastic edgings, e.g. elastic rubber tubes; by means of resilient edgings, e.g. felt or plush strips, resilient metal strips (E 06 B 7/18 takes precedence)  

7
/ 23 Plastic, sponge rubber, or like strips or tubes  

7
/ 232 Resilient strips of hard material, e.g. metal  

7
/ 24 without separate sealing members, e.g. with labyrinth  

7
/ 26 Rain or draught deflectors, e.g. under sliding wings  

7
/ 28 Other arrangements on doors or windows, e.g. door-plates, windows adapted to carry plants, hooks for window cleaners  

7
/ 30 Peep-holes; Devices for speaking through; Doors having windows  

7
/ 32 Serving doors; Passing-through doors  

7
/ 34 Doors containing cupboards (cabinets in general A 47 B)  

<< >>
1 3 4