(0)E05B:0/5:
IPC6
SECTION E - FIXED CONSTRUCTIONS
LOCKS; ACCESSORIES THEREFOR; HANDCUFFS
E05B
1/6
<<   >>   E05B001/00 - E05B011/06  

E 05

 LOCKS; KEYS; WINDOW OR DOOR FITTINGS; SAFES
 

Note
 

In this class, the following terms are used with the meanings indicated:
 

-

 "wing" is a general term for swingable, slidable, or otherwise movable doors or windows. This term also includes other movable structures such as drawers, lids of chests, car boots, or car bonnets, to which the operating, mounting, latching, or locking means covered by this class may be applied;
 

-

 "frame" means any member to which a wing may be held by a fastening device. It does not include a framework forming part of the wing, but it may be another wing;
 

-

 "lock" means primarily a device for releasing or securing any member, which requires a key or a permutation mechanism for release. In groups E 05 B 1/00 to E 05 B 9/00, E 05 B 13/00 to E 05 B 17/00, E 05 B 39/00 to E 05 B 47/00, E 05 B 51/00, E 05 B 53/00, E 05 B 63/00 and E 05 B 65/00 however, the term "lock" may include other fastening devices;
 

-

 "bolt" means a sliding, pivoted, or otherwise movable member such as is normally carried by a door to hold it shut by engagement with a keeper on the frame. It may be operated by hand directly or through mechanism or by a key; it may be a latch (see below);
 

-

 "latch" means a bolt arranged to be moved to the releasing position against the force of a spring, or some other returning force, when a wing meets the frame on closing, so that it does not have to be operated by hand to secure the wing, but only to open it;
 

-

 "hasp" means a member hinged to the frame or wing so that it can be moved towards the face of the wing or frame and secured thereto, e.g. by a turn-button, by a padlock and staple.

E 05 B

 LOCKS; ACCESSORIES THEREFOR; HANDCUFFS

 

 

 

Parts of locks or the like mountable on or in wings
 

 1
/ 00 Knobs or handles for wings (for furniture A 47 B 95/02); Knobs, handles, or press buttons for locks or latches on wings (E 05 B 5/00, E 05 B 7/00 take precedence)

1
/ 02 • of solid material  

1
/ 04 • with inner rigid member and outer cover or covers  

1
/ 06 • of sheet material  
 

 3
/ 00 Fastening handles to lock or latch parts

3
/ 02 • Fastening handles to the spindle by pinning or riveting  

3
/ 04 • Fastening the handle shank to the spindle by screws, springs, or snap bolts  

3
/ 06 • by means arranged in or on the rose  

3
/ 08 • Fastening the spindle to the follower  

3
/ 10 • by a bipartite or cleft spindle in the follower or in the handle shank  
 

 5
/ 00 Handles completely let into the surface of the wing

5
/ 02 • able to be turned outwards before operation  

5
/ 04 • able to be shifted parallel to the wing after being pulled out  
 

 7
/ 00 Handles pivoted about an axis parallel to the wing (E 05 B 5/00 takes precedence)
 

 9
/ 00 Lock or latch-mechanism casings (padlock casings E 05 B 67/02)

9
/ 02 • of latch-bolt locks  

9
/ 04 • of cylinder locks  

9
/ 06 • Fastening together the parts of casings  

9
/ 08 • Fastening the casings of latch-bolt locks or cylinder locks to the wing  

9
/ 10 • Coupling devices for the two halves of double cylinder locks  
 

 11
/ 00 Devices preventing keys from being removed from the lock

11
/ 02 • before the wing is locked  

11
/ 04 • before the wing is closed  

11
/ 06 • for catching skeleton or incorrect keys  
<< >>
1 1 6