(0)C10G:7/7:
IPC6
SECTION C - CHEMISTRY; METALLURGY
CRACKING HYDROCARBON OILS; PRODUCTION OF LIQUID HYDROCARBON...
C10G
8/8
<<   >>   C10G067/00 - C10G075/02  

67
/ 00 Treatment of hydrocarbon oils by at least one hydrotreatment process and at least one process for refining in the absence of hydrogen only [3]

67
/ 02 plural serial stages only [3]  

67
/ 04 including solvent extraction as the refining step in the absence of hydrogen [3]  

67
/ 06 including a sorption process as the refining step in the absence of hydrogen [3]  

67
/ 08 including acid treatment as the refining step in the absence of hydrogen [3]  

67
/ 10 including alkaline treatment as the refining step in the absence of hydrogen [3]  

67
/ 12 including oxidation as the refining step in the absence of hydrogen [3]  

67
/ 14 including at least two different refining steps in the absence of hydrogen [3]  

67
/ 16 plural parallel stages only [3]  
 

69
/ 00 Treatment of hydrocarbon oils by at least one hydrotreatment process and at least one other conversion process (C 10 G 67/00 takes precedence) [3]

69
/ 02 plural serial stages only [3]  

69
/ 04 including at least one step of catalytic cracking in the absence of hydrogen [3]  

69
/ 06 including at least one step of thermal cracking in the absence of hydrogen [3]  

69
/ 08 including at least one step of reforming naphtha [3]  

69
/ 10 hydrocracking of higher boiling fractions into naphtha and reforming the naphtha obtained [3]  

69
/ 12 including at least one polymerisation or alkylation step [3]  

69
/ 14 plural parallel stages only [3]  
 

70
/ 00 Working-up undefined normally gaseous mixtures obtained by processes covered by groups C 10 G 9/00, C 10 G 11/00, C 10 G 15/00, C 10 G 47/00, C 10 G 51/00 [5]

70
/ 02 by hydrogenation [5]  

70
/ 04 by physical processes [5]  

70
/ 06 by gas-liquid contact [5]  
 

71
/ 00 Treatment by methods not otherwise provided for of hydrocarbon oils or fatty oils for lubricating purposes (by Fischer-Tropsch C 07 C 1/00; lubricating compositions C 10 M) [3]

71
/ 02 Thickening by voltolising (chemical modification of drying-oils by voltolising C 09 F 7/04) [3]  

71
/ 04 (transferred to C 10 G 50/02)
 

73
/ 00 Recovery or refining of mineral waxes, e.g. montan wax (compositions essentially based on waxes C 08 L 91/00) [3]

73
/ 02 Recovery of petroleum waxes from hydrocarbon oils; De-waxing of hydrocarbon oils [3]  

73
/ 04 with the use of filter aids [3]  

73
/ 06 with the use of solvents [3]  

73
/ 08 Organic compounds [3]  

73
/ 10 Hydrocarbons [3]  

73
/ 12 Oxygen-containing compounds [3]  

73
/ 14 Halogen-containing compounds [3]  

73
/ 16 Nitrogen-containing compounds [3]  

73
/ 18 containing sulfur, selenium or tellurium [3]  

73
/ 20 containing phosphorus [3]  

73
/ 22 Mixtures of organic compounds [3]  

73
/ 23 Recovery of used solvents [6]  

73
/ 24 by formation of adducts [3]  

73
/ 26 by flotation [3]  

73
/ 28 by centrifugal force [3]  

73
/ 30 with electric means [3]  

73
/ 32 Methods of cooling during de-waxing [3]  

73
/ 34 Controlling or regulating (controlling or regulating in general G 05) [3]  

73
/ 36 Recovery of petroleum waxes from other compositions containing oil in minor proportions, from concentrates or from residues; De-oiling, sweating [3]  

73
/ 38 Chemical modification of petroleum waxes [3]  

73
/ 40 Physical treatment of waxes or modified waxes, e.g. granulation, dispersion, emulsion, irradiation [3]  

73
/ 42 Refining of petroleum waxes [3]  

73
/ 44 in the presence of hydrogen or hydrogen-generating compounds [3]  
 

75
/ 00 Inhibiting corrosion or fouling in apparatus for treatment or conversion of hydrocarbon oils, in general (C 10 G 7/10 , C 10 G 9/16 take precedence; protection of pipes against corrosion or incrustation F 16 L 58/00) [6]

75
/ 02 by addition of corrosion inhibitors [6]  

75
/ 04 by addition of antifouling agents [6]  

 

 

 


<< >>
1 8 8