(0)B27L:0/0:
IPC6
SECTION B - PERFORMING OPERATIONS; TRANSPORTING
REMOVING BARK OR VESTIGES OF BRANCHES; SPLITTING WOOD;...
B27L
1/1

B 27 L

REMOVING BARK OR VESTIGES OF BRANCHES (forestry A 01 G); SPLITTING WOOD; MANUFACTURE OF VENEER, WOODEN STICKS, WOOD SHAVINGS, WOOD FIBRES OR WOOD POWDER

 

 

 

 

1
/ 00 Debarking or removing vestiges of branches from trees or logs (debarking by chemical treatment B 27 L 3/00); Machines therefor [2]

Note

 

Tree-feeding devices are covered by group B 27 B 25/00. [5]

1
/ 02 by rubbing the trunks against each other (B 27 L 1/04 takes precedence); Equipment for wet practice [5]  

1
/ 04 by rubbing the trunks in rotating drums [5]  

1
/ 05 Drums therefor [5]  

1
/ 06 Manually-operated or portable devices for debarking or for removing vestiges of branches  

1
/ 08 using rotating rings [5]  

1
/ 10 using rotatable tools (B 27 L 1/04, B 27 L 1/08, B 27 L 1/12 take precedence) [5]  

1
/ 12 using pliable tools [5]  

1
/ 14 using jets of fluid [5]  
 

3
/ 00 Debarking by chemical treatment
 

5
/ 00 Manufacture of veneer (working veneer or plywood B 27 D)

5
/ 02 Cutting strips from a rotating trunk or piece; Veneer lathes  

5
/ 04 the trunk being rotated about an axis lying outside it  

5
/ 06 Cutting strips from a stationarily-held trunk or piece by a rocking knife carrier, or from rocking trunk or piece by a stationarily-held knife carrier; Veneer-cutting machines  

5
/ 08 Severing sheets or segments from veneer strips; Shearing devices therefor; Making veneer blanks, e.g. trimming to size  
 

7
/ 00 Arrangements for splitting wood [6]

7
/ 02 using rotating members [6]  

7
/ 04 Conical screws [6]  

7
/ 06 using wedges, knives or spreaders (B 27 L 7/02 takes precedence) [6]  

7
/ 08 using chopping blocks [6]  
 

9
/ 00 Manufacture of wooden sticks, e.g. toothpicks (of walking sticks, of sticks for umbrellas B 27 M 3/38; combined with other operations in the manufacture of matches C 06 F)
 

11
/ 00 Manufacture of wood shavings, chips, powder, or the like (disintegrating in general B 02 C; edge trimming sawing blades or sawing tools combined with means to disintegrate waste B 27 B 33/20; obtaining fibres for spinning D 01 B 1/00; wet methods D 21 B 1/12); Tools therefor [2]

11
/ 02 of wood shavings or the like  

11
/ 04 of wood wool  

11
/ 06 of wood powder or sawdust (grinding-stones B 24 D)  

11
/ 08 of wood fibres, e.g. produced by tearing