(0)B05B:0/2:
IPC6
SECTION B - PERFORMING OPERATIONS; TRANSPORTING
SPRAYING APPARATUS; ATOMISING APPARATUS; NOZZLES
B05B
1/3
<<   >>   B05B001/00 - B05B001/36  

B 05

 SPRAYING OR ATOMISING IN GENERAL; APPLYING LIQUIDS OR OTHER FLUENT MATERIALS TO SURFACES, IN GENERAL (domestic cleaning A 47 L; cleaning in general by methods essentially involving the use or presence of liquid B 08 B 3/00; sand-blasting B 24 C; coating of articles during shaping of substances in a plastic state B 29 C 39/10, B 29 C 39/18, B 29 C 41/20, B 29 C 41/30, B 29 C 43/18, B 29 C 43/28, B 29 C 45/14, B 29 C 47/02; for further classification of forming layered products, see B 32 B; printing, copying B 41; conveying articles or workpieces through baths of liquid B 65 G, e.g. B 65 G 49/02; handling webs or filaments in general B 65 H; paints, varnishes, lacquers C 09 D; enamelling of metals, applying a vitreous layer to metals, chemical cleaning or de-greasing of metallic objects C 23; electroplating C 25 D; treating of textile materials by liquids, gases or vapours D 06 B ; laundering D 06 F; treating roads E 01 C; apparatus or processes for the preparation or treatment of photosensitive materials G 03; apparatus or processes, restricted to a purpose fully provided for in a single other class, see the relevant class covering the purpose) [2]
 

Note
 

In this class, the following terms or expressions are used with the meanings indicated:
 

-

 "other fluent materials" includes semiliquids, pastes, melts, solutions, dispersions, suspensions, particulate materials, gases or vapours; [2]
 

-

 "particulate materials" includes powders, granules, short fibres or chips; [2]
 

-

 "coating" means the materials applied. The coating may be a liquid having become solid after drying, e.g. paint. [2]

B 05 B

 SPRAYING APPARATUS; ATOMISING APPARATUS; NOZZLES (spray-mixers with nozzles B 01 F 5/20; processes for applying liquids or other fluent materials to surfaces by spraying B 05 D; means for pumping fluids F 04; valves, e.g. water-taps, F 16 K) [2]
 

Notes

(1)

 This subclass covers particularly apparatus for the release or projection of drops or droplets into the atmosphere or into a chamber to form a mist or the like. For this purpose, the materials to be projected may be suspended in a stream of gas or vapour. [2]

(2)

 Attention is drawn to the Note following the title of class B 05. [2]

 

 

 
 

 1
/ 00 Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means (B 05 B 3/00, B 05 B 5/00, B 05 B 7/00 take precedence; devices for applying liquids or other fluent materials to surfaces by contact B 05 C; nozzles for jet-ink printing mechanisms B 41 J 2/135; closures for containers B 65 D; nozzles for liquid-dispensing, e.g. in vehicle service stations, B 67 D 5/37)

1
/ 02 • designed to produce a jet, spray, or other discharge of particular shape or nature, e.g. in single drops (B 05 B 1/26, B 05 B 1/28, B 05 B 1/34 take precedence)  

1
/ 04 • • in flat form, e.g. fan-like, sheet-like  

1
/ 06 • • in annular, tubular or hollow conical form  

1
/ 08 • • of pulsating nature, e.g. delivering liquid in successive separate quantities  

1
/ 10 • • in the form of a fine jet, e.g. for use in wind-screen washers  

1
/ 12 • capable of producing different kinds of discharge, e.g. either jet or spray (B 05 B 1/16 takes precedence)  

1
/ 14 • with multiple outlet openings (B 05 B 1/02, B 05 B 1/26 take precedence); with strainers in or outside the outlet opening  

1
/ 16 • • having selectively-effective outlets  

1
/ 18 • • Roses; Shower heads  

1
/ 20 • • Perforated pipes or troughs, e.g. spray booms; Outlet elements therefor  

1
/ 22 • Spouts (anti-splash devices for water-taps E 03 C 1/08)  

1
/ 24 • incorporating means for heating the liquid or other fluent material, e.g. electrically  

1
/ 26 • with means for mechanically breaking-up or deflecting the jet after discharge, e.g. with fixed deflectors; Breaking-up the discharged liquid or other fluent material by impinging jets  

1
/ 28 • with integral means for shielding the discharged liquid or other fluent material, e.g. to limit area of spray; with integral means for catching drips or collecting surplus liquid or other fluent material (means for any of these purposes, per se, B 05 B 15/04)  

1
/ 30 • designed to control volume of flow, e.g. with adjustable passages (B 05 B 1/02 takes precedence)  

1
/ 32 • • in which a valve member forms part of the outlet opening  

1
/ 34 • designed to influence the nature of flow of the liquid or other fluent material, e.g. to produce swirl (B 05 B 1/30 takes precedence)  

1
/ 36 • Outlets for discharging by overflow  
<< >>
1 1 3